4210-115-60FPM ARTISAN CONTROLS, 4210-115-60FPM Datasheet - Page 2

• Manufacturer Part Number: 4210-115-60FPM
• Description: SOLID STATE FLASHER, 60FPM, 115VAC
• Manufacturer: ARTISAN CONTROLS

Specifications of 4210-115-60FPM

• Nom Input Voltage: 115VAC
• Delay Time Range: 60FPM
• Timing Adjustment: Fixed
• Relay Mounting: Panel
• Contact Rating: 1A, 115VAC
• Time Range: 1 To 60FPM
• Flash Rate Per Minute: 60
• Supply Voltage: 115VAC
• Current, Rating: 10 mA-1 A
• Depth: 0.36 in.
• Duty Cycle: 50%
• Function: Timing
• Length: 2.65 in.
• Relay Type: Solid State
• Standards: UL
• Temperature, Operating, Maximum: 85 °C
• Temperature, Operating, Minimum: -20 °C
• Termination: Quick Connect
• Timer Type: Flasher
• Timing Range: 60 FPM
• Voltage, Control: 115 VAC
• Width: 2.25 in.
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC Circuit

Notice: Artisan Controls Corporation assumes no responsibility for customers applications or product design. The information and data contained herein is
the sole and exclusive property of Artisan Controls Corporation. Any duplication, misuse, or conversion of this information without the express written
consent of Artisan Controls Corporation is illegal and will result in damages including court costs and attorney fees being assessed against the party
misusing this property
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Part Number Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4210-24-90FPM A model 4210 operating from 24V AC with a flash rate of 90 flashes-per-minute (FPM)
The load circuit will be ON for 333mS and OFF for 33mS.
4210-115-60FPM A model 4210 operating from 115V AC with a flash rate of 60 flashes-per-minute (FPM)
The load circuit will be ON for 500mS and OFF for 500 mS.
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flash Rate Duty Cycle Tolerance:
Repeatability Of Flashing Period:
Output Switch Leakage Current:
Part Number - Operating Voltage - Flash Rate (FPM)
4210 -
Tolerances On Fixed Timing:
Output Switch Voltage Drop:
Tel: [phone] • Fax: [phone] • Toll Free: 800-457-4950
Data Sheet Revision Date:
Artisan Controls Corporation, 111 Canfield Ave., Bldg B15-18, Randolph, NJ, 07869, USA
Operating Temperature:
Fixed Flash Duty Cycle:
Agency Recognitions:
Transient Protection:
Flash Rate Variation:
Voltage Tolerances:
V
Operating Voltage:
Fixed Flash Rate:
I S I T
Solid State Timers and Controllers
Output Rating:
Recycle Time:
Timing Mode:
MTBF Rating:
Construction:
Dielectric:
12
24
48
115
230
O U R
W E B
AC only (12, 24, 48, 115, 230) 50/60 Hz.
±15%.
Flasher.
Factory fixed at any rate from 1 to 300 flashes-per-minute (FPM)
50%.
±10% (2% nominal).
2%, 5%, 10%, and 20% available.
Less than 4% of set point over full temperature and voltage range.
±2% at stabilized operating voltage temperature.
Operating voltage must be removed for a minimum of 200 milliseconds
to assure that timing and output circuits are reset. If it is not a requirement
that the load circuit always be energized when operating voltage is reapplied,
the operating voltage may be re-applied at any time.
10mA to 1A inductive with inrush current to 8A for 8 milliseconds.
3 volts AC maximum when load circuit is energized.
3 mA maximum when load circuit is de-energized.
Output switch protected by silicon transient suppressors responding to
transients within 1 x 10
of 1500 watts, with transient surge currents to 200 amperes for
durations up to 1/120 second at 25° C. Maximum transient voltage
protection is 6000 volts as delivered through a source resistance of 30
ohms with a maximum duration of 8.3ms.
1500V rms all terminals to case.
-20°C to +85°C
50,000 hrs minimum.
Encapsulated module with .25 quick connect wiring terminals.
UL File E47858, Appliance Controls - Component ATNZ2, Auxilliary Devices -
Component NKCR2.
February 21, 2006
Per Minute (FPM)
1 to 300 Flashes
Required From
Specify Fixed
S I T E
Flash Rate
A T
:
www.artisancontrols.com
-12
seconds to a peak pulse power dissipation