H2C-SA 110AC Omron, H2C-SA 110AC Datasheet - Page 6

• Manufacturer Part Number: H2C-SA 110AC
• Description: ON DELAY TIMER, 110VAC
• Manufacturer: Omron

Specifications of H2C-SA 110AC

• Contact Configuration: SPDT
• Nom Input Voltage: 110VAC
• Delay Time Range: 1.25s To 30h
• Adjustment Type: Knob
• Relay Mounting: Panel
• Svhc: No SVHC (15-Dec-2010)
• Coil Voltage Vac Nom: 110V

H2C
6
Mounting Track (Meets DIN EN50022)
PFP-100N/PFP-50N
Note: This dimension applied to PFP-50N.
End Plate
PFP-M
H2C (with PF113A)
Adapter for Flush Mounting
Y92F-30
Note: The adapter can be mounted to the timer form any side of
Note: For a load current of 3 A max., a spacer and an end
the timer housing since the adapter security notches are
provided on all four sides of the housing.
plate are not required. For a load current of 6 A, one
spacer or an end plate is required.
(see note)
(See
note)
(See note)
PFP-100N2
PFP-S
H2C-F
Timer Hold-down Clips
Y92H-2
(for PF085A/PF113A
Connecting Socket)
Note: A total of twelve, 25 x 4.5 elliptic holes are provided with 6
Note: For a load current of 1 A max., a spacer and an end
holes cut from each rail end at a pitch of 10 mm between
holes.
plate are not required. For a load current of 3 A max.,
one spacer or an end plate is required. For a load cur-
rent of 6 A max. two spacers or two end plates are re-
quired.
Twelve, 25 ' 4.5 elliptic holes (see note)
(See
note)
Y92H-1
(for PL08/PL11
Connecting Socket)
H2C