AS5045-ASST austriamicrosystems, AS5045-ASST Datasheet - Page 12

• Manufacturer Part Number: AS5045-ASST
• Description: IC ENCODER PROG 12-BIT 16-SSOP
• Manufacturer: austriamicrosystems
• Type: Linear, Rotary Encoder - Programmabler

Specifications of AS5045-ASST

• Sensing Range: 45mT ~ 75mT
• Voltage - Supply: 3 V ~ 3.6 V, 4.5 V ~ 5.5 V
• Current - Supply: 21mA
• Current - Output (max): 4mA
• Output Type: Digital, PWM, 12-Bit Serial
• Features: Programmable
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 16-SSOP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: AS5045-ASSTTR

AS5045
Data Sheet
7 Functional Description
The AS5045 is manufactured in a CMOS standard process and uses a spinning current Hall technology for sensing
the magnetic field distribution across the surface of the chip.
The integrated Hall elements are placed around the center of the device and deliver a voltage representation of the
magnetic field at the surface of the IC.
Through Sigma-Delta Analog / Digital Conversion and Digital Signal-Processing (DSP) algorithms, the AS5045
provides accurate high-resolution absolute angular position information. For this purpose a Coordinate Rotation
Digital Computer (CORDIC) calculates the angle and the magnitude of the Hall array signals.
The DSP is also used to provide digital information at the outputs M a g I N C n and M a g D E C n that indicate
movements of the used magnet towards or away from the device’s surface.
A small low cost diametrically magnetized (two-pole) standard magnet provides the angular position information (see
Figure 17).
The AS5045 senses the orientation of the magnetic field and calculates a 12-bit binary code. This code can be
accessed via a Synchronous Serial Interface (SSI). In addition, an absolute angular representation is given by a
Pulse Width Modulated signal at pin 12 (PWM). This PWM signal output also allows the generation of a direct
proportional analogue voltage, by using an external Low-Pass-Filter.
The AS5045 is tolerant to magnet misalignment and magnetic stray fields due to differential measurement technique
and Hall sensor conditioning circuitry.
Figure 4. AS5045 Block Diagram
www.austriamicrosystems.com
Revision 1.7
12 – 33