ISL29102IROZ-T7 Intersil, ISL29102IROZ-T7 Datasheet - Page 7

• Manufacturer Part Number: ISL29102IROZ-T7
• Description: IC OPT SENSOR LIGHT-VOLT 6-ODFN
• Manufacturer: Intersil

Specifications of ISL29102IROZ-T7

• Wavelength: 400 ~ 600nm
• Output Type: Analog
• Package / Case: 6-ODFN
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: ISL29102IROZ-T7TR

Application Information
Light-to-Voltage Conversion
The ISL29102 has responsiveness that is a square-root
function of the light intensity intercepted by the photodiode in
lux. Because the photodiode has a responsivity that
resembles the human eye, conversion rate is independent of
the light source (fluorescent light, incandescent light or direct
sunlight).
In Equation 1, V
intensity and R
V
OUT
=
---------------------- - E
2.00mm
1.8μA
100lux
EXT
OUT
is the value of the external resistor. The
×
is the output voltage, E is the light
R
EXT
0.19mm
7
FIGURE 18. 6 LD ODFN SENSOR LOCATION OUTLINE
(EQ. 1)
ISL29102
2.10mm
R
compliance of the ISL29102's output circuit may result in
premature saturation when an excessively large R
used. The output compliance voltage is 700mV below the
supply voltage as listed in V
Specifications” table on page 3.
Optical Sensor Location Outline
The green area in Figure 18 shows the optical sensor
location outline of ISL29102. Along the pinout direction, the
center line (CL) of the sensor coincides with that of the
packaging. The sensor width in this direction is 0.39mm.
Perpendicular to the pinout direction, the CL of the sensor
has an 0.19mm offset from the CL of packaging away from
pin 1. The sensor width in this direction is 0.46mm.
EXT
is used to set the light-to-voltage scaling constant. The
0.39mm
O-MAX
of the “Electrical
0.46mm
EXT
July 15, 2010
FN6483.1
is