SM91EANQD BANNER ENGINEERING, SM91EANQD Datasheet - Page 40

• Manufacturer Part Number: SM91EANQD
• Description: Photoelectric Sensor
• Manufacturer: BANNER ENGINEERING

Specifications of SM91EANQD

• Output Current: 150mA
• Sensor Output: NPN/PNP
• Supply Voltage Range Dc: 10V To 30V
• Peak Reflow Compatible (260 C): No
• Sensor Input: Optical
• Sensing Range Max: 30m
• Leaded Process Compatible: No

366
VALU-BEAM
Supply Voltage and Current
Output Response Time
Output Rating
Indicators
Construction
Environmental Rating
Connections
Operating Conditions
Water Immersion
Sunlight Immunity
Strobe Light Immunity
EMI-RFI Immunity
Certifications
Output Configuration
®
SM91EN/RN Series Sensors
10 to 30V dc at 20 mA maximum for receivers (exclusive of load current) and 25 mA maximum for emitters
Bipolar: one current sourcing (PNP) and one current sinking (NPN) open-collector transistor
12 to 28 milliseconds, depending upon code
LIGHT operate only
150 mA maximum (continuous, each output)
Off-state leakage current is 100 microamps, maximum
On-state saturation voltage less than 1V at 10 mA and less than 2 V at 150 mA (PNP); less than 200
millivolts at 10 mA and less than 1V at 150 mA (NPN)
Top-mounted LED indicator - a red LED (on receivers) lights when the output is conducting and pulses at
a rate proportional to the strength of the received light signal; a green LED (on emitters) lights when the
infrared sensing beam is “ON”
Reinforced black thermoplastic polyester housing, totally epoxy-encapsulated, replaceable acrylic lenses
Meets NEMA 6P and IEC IP67 standards
PVC-jacketed 2 m (6.5') or 9 m (30') cables or integral mini-style quick-disconnect (QD) fitting are available
Temperature:
Maximum relative humidity: 90% at 50°C (non-condensing)
Sensors will continue to operate during and after being submerged in water at a depth of 2 m (6') for a
period of 48 hours
NOTE: Immersion greatly reduces the efficiency of the lens, which results in greatly diminished sensing range
Receivers may be pointed into a light source of 120,000 lux without false-triggering, and will still respond
only to the infrared beam from their modulated emitters. Receivers will not respond to sunlight reflected
from water spray droplets.
Receivers are totally immune to one Federal Signal Corp. “Fireball” model FB2PST strobe
Emitters and receivers will not respond to transmissions from a 5-watt output walkie-talkie on the test
frequencies of 464.500 and 151.625 megahertz when the walkie-talkie’s antenna is held 6" or more away
from the sensor.
Banner Engineering Corp. • Minneapolis, U.S.A. • www.bannerengineering.com • Tel: [phone]
SM91EN/RN Series Specifications
0° to 70°C (+32 to 158°F)