E32-TC200E Omron, E32-TC200E Datasheet - Page 20

• Manufacturer Part Number: E32-TC200E
• Description: FIBER OPTIC CABLE
• Manufacturer: Omron
• Type: General Purposer

Specifications of E32-TC200E

• Rohs Compliant: YES
• Fiber Optic Sensor Type: General Purpose
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

20
E3X-DAC-S
Function Transitions
Set the SET/RUN
Mode Selector to SET.
Functions
4
Operation mode
Detection
Timer
MODE key
Teaching level
Display switch
Display orientation
Output setting
External input
External input memory
Judgment mode
Use the UP and DOWN Keys to change the settings.
Timer time
(timer enabled)
Timer function
Timer time
Setting Functions in SET Mode
Function
SET
➜
Refer to 2. Registering Workpiece
Colors with Teaching in SET Mode.
Page 19
(1) Match/threshold:
(2) Margin/threshold:
(3) Peak/Bottom refreshed every 2 s:
(4) Peak/Bottom refreshed every time the output is switched:
(5) Analog bar display:
(6) Match/peak (updated periodically):
(7) Match/channel:
➜
Each channel:
Match: ON
Super-high-speed:
Standard:
Note: If the detection function is changed, be sure to
Enabled:
ON-delay timer:
1 to 5000 ms:
(1 to 20: 1-ms increments, 20 to 200 ms: 5-ms increments,
200 to 1000: 100-ms increments, 1000 to 5000: 1000-ms increments)
1-point teaching:
Zero-shift reset:
0 to 99P:
Normal display:
Enabled:
ON-delay timer:
1 to 5000 ms:
(1 to 20: 1-ms increments, 20 to 200 ms: 5-ms increments,
200 to 1000: 100-ms increments, 1000 to 5000: 1000-ms increments)
1-point teaching:
Zero-shift reset:
Write:
C/I automatic judgment:
BLACK mode:
Page 21 Refer to 5-1. Zeroing the Display (Zero Reset).
(Used to set the judgment
Judgment mode
mode)
teach the workpiece color.
, Do not write:
Teaching
to
, Mismatch:
, OFF-delay timer:
, OFF-delay timer:
to
, High-resolution:
to
Settings (display)
, AND:
, One-shot timer:
, Upside down display:
, One-shot timer:
, Light OFF:
, High-speed:
, Teaching with workpiece:
, Teaching without workpiece:
*
(To set the operation mode)
(Refer to instructions
provided with the product.)
External input memory
Operation mode
, C mode: , I mode:
, OR:
,
(To change function controlled
by external input.)
(To increase the response
speed or detection precision)
External input
Detection
*. The displays shown in the function transitions are for the default settings.
*. Items shown in the function transitions may increase depending on
*. The items enclosed by dotted red lines are for advanced models only.
detailed settings.
➜
Used to increase the response speed or detection precision.
Note: Only I Mode (light intensity determination for red, green, or blue)
Used to set control output timers.
Used to change timer times.
The timer can be set from 1 ms to 5 s.
Used to change the function of the MODE key during
operation.
Used to change the threshold setting level during 1-point teaching.
Used to change the orientation of the display.
Used to change the item output on control output 2.
Used to set timers for the AND/OR control output.
Used to change timer time.
The timer can be set from 1 ms to 5 s.
Used to change the functions to be remotely controlled with external input.
(For the effective pulse width and other information, refer to the
instructions provided with the product.)
Used to set whether to write the control results to memory.
(Refer to the instructions provided with the product.)
Used to set the judgment mode (detection method). BLACK mode:
The total light intensity for red, green, and blue is used for the judgment.
1. Used to display the degree of matching and the threshold.
2. Used to display the excess gain (i.e., percentage of matching relative
3. Used to display the peak and bottom degrees of matching at a fixed
4. Used to display the peak degree of matching when there is a match
5. Used to show the detection status with a bar display. Red bars will be
6. Used to display the present degree of matching and the peak degree
7. Used to display the degree of matching and channel number.
Page 19 Refer to 1. Setting the Operation Mode.
Example: The threshold level at the default setting (
When the setting is
to threshold) and the threshold.
interval.
and the bottom degree of matching when there is no match.
displayed if the degree of match exceeds the threshold.
of matching.
can be used with Super-high-speed mode.
(To change the channel 2
output)
(To use the timer setting)
MODE
Output setting
When the settings
have been completed
Timer
, the threshold level is
(To change the function of the
MODE key during operation)
Description
(To reverse the orientation
of the display.)
Display orientation
MODE key
Set the SET/RUN
Mode Selector Switch to
.
(To change the teaching
level)
Teaching level
(To change the display
method)
Display switch
) is
RUN
.
RUN
.