FH12-8S-1SH(55) Hirose Electric Co Ltd, FH12-8S-1SH(55) Datasheet - Page 18

• Manufacturer Part Number: FH12-8S-1SH(55)
• Description: CONN FPC/FFC 8POS 1MM HORIZ SMD
• Manufacturer: Hirose Electric Co Ltd
• Series: FH12r

Specifications of FH12-8S-1SH(55)

• Housing Material: Polyamide (PA), Nylon
• Voltage Rating: 50V
• Current Rating: 0.500A
• Pitch: 0.039" (1.00mm)
• Connector Type: Bottom Contacts
• Number Of Positions: 8
• Ffc, Fcb Thickness: 0.30mm
• Height Above Board: 0.079" (2.00mm)
• Mounting Type: Surface Mount, Right Angle
• Cable End Type: Straight
• Termination: Solder
• Locking Feature: Flip Lock
• Features: Zero Insertion Force (ZIF)
• Contact Finish: Gold
• Operating Temperature: -40°C ~ 85°C
• Product Type: PCB Receptacles
• Number Of Positions / Contacts: 8
• Mounting Angle: Right
• Mounting Style: SMD/SMT
• Contact Material: Phosphor Bronze
• Contact Plating: Gold
• Contact Location: Bottom Contact
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: HFB108TR

18
FH12 Series 0.5mm and 1mm Pitch Connectors For FPC/FFC
Bottom Contact Type (common for 0.5mm/1mm Pitch)
3) Rotate down the actuator until firmly closed.
2. FPC/FFC Removal
1) Lift up the actuator.
2) Carefully remove the FPC/FFC.
It is critical that the inserted FPC/FFC is not moved
and remains fully inserted. Should the FPC/FFC be
moved, open the actuator and repeat the process,
starting with Step 1.
Operation
Stiffener
6) Partial insertion of the FPC/FFC, offset insertion, and
7) When locking, handle the FPC/FFC so that a load
8) At the time of lock operation, application of force
diagonal insertion will result in an unfavorable engage-
ment of the lock lever in which the lock lever is raised.
To correct this, first remove the FPC/FFC and then
reinsert it. Forcing the lock will damage the connector.
is not applied to the FPC/FFC as would occur by
pulling the FPC/FFC, or lifting it, etc.
When a load is applied in the opposite direction to
the rotational movement of the lock, an excessive
load will be applied and this will cause connector
damage.
such as that indicated by the arrows in the dia-
grams below will cause the lock lever to disengage.
When the lock lever has become disengaged,
please exchange the entire connector.
Precautions