FH12-8S-1SH(55) Hirose Electric Co Ltd, FH12-8S-1SH(55) Datasheet - Page 20

• Manufacturer Part Number: FH12-8S-1SH(55)
• Description: CONN FPC/FFC 8POS 1MM HORIZ SMD
• Manufacturer: Hirose Electric Co Ltd
• Series: FH12r

Specifications of FH12-8S-1SH(55)

• Housing Material: Polyamide (PA), Nylon
• Voltage Rating: 50V
• Current Rating: 0.500A
• Pitch: 0.039" (1.00mm)
• Connector Type: Bottom Contacts
• Number Of Positions: 8
• Ffc, Fcb Thickness: 0.30mm
• Height Above Board: 0.079" (2.00mm)
• Mounting Type: Surface Mount, Right Angle
• Cable End Type: Straight
• Termination: Solder
• Locking Feature: Flip Lock
• Features: Zero Insertion Force (ZIF)
• Contact Finish: Gold
• Operating Temperature: -40°C ~ 85°C
• Product Type: PCB Receptacles
• Number Of Positions / Contacts: 8
• Mounting Angle: Right
• Mounting Style: SMD/SMT
• Contact Material: Phosphor Bronze
• Contact Plating: Gold
• Contact Location: Bottom Contact
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: HFB108TR

20
FH12 Series 0.5mm and 1mm Pitch Connectors For FPC/FFC
Vertical Mounting Type (common for 0.5mm/1mm Pitch)
1. FPC/FFC Termination procedure.
1) Verify that the actuator is positioned upright. If the
2) Insert the FPC/FFC vertically in the connector slot
3) Press down the actuator in the direction shown.
2. FPC/FFC Removal
Connector installed on the board.
actuator has rotated to the side, carefully rotate it
upright.
assuring that the conductive traces of the
FPC/FFC are facing away from the actuator.
Rotate the actuator upward and withdraw the FPC/FFC.
Stiffener
The contents of this catalog are current as of date of 09/2010. Contents are subject to change without notice for the purpose of improvements.
Operation
®
Actuator upright
FPC/FFC conductive traces
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: [phone], FAX: [phone]
http://www.hirose.com
http://www.hirose-connectors.com
1) Avoid forcing the actuator up or down without the
2) Do not insert the FPC/FFC diagonally.
Doing so will result in the corners of the FPC/FFC
catching on the contacts and will cause deforma-
tion of the contacts.
FPC/FFC inserted.
Precautions