6100-W 3M, 6100-W Datasheet - Page 12

• Manufacturer Part Number: 6100-W
• Description: CONN F/OPTIC HOT MELT ST MM
• Manufacturer: 3M

Specifications of 6100-W

• Connector Style: ST
• Simplex/duplex: Simplex
• Mode: Multimode
• Mounting Type: Free Hanging (In-Line)
• Fastening Type: Bayonet Lock
• Ferrule Material: Zirconia, Ceramic
• Features: Hot Melt
• Color: White
• Product: ST Connectors
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Connector Type: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 5400791141; 54007911418; 6100; 6100W; 80-6107-4702-6; 80-6111-2753-3; 80610747026; 80611127533; MF6100

6.0 SCÑInstallation on Jacketed Cable
6.1 Turn on the Hot Melt oven. The
6.4 Load the connector into the SC
6.7 Place the strain relief boot and
6.10 Gather the aramid yarn
oven requires 5 minutes to
warm up.
connector holder.
crimp ring on the cable.
together and hold them against
the cable jacket.
6.2 Open the package and remove
6.5 Push down on the connector and
6.8 Score the jacket 1
6.11 To prevent the buffered fiber
turn it 90 degrees so that the
arms hold the connector in place.
the components.
from the end.
from being pulled out, lace
the cable through your fingers.
12
3
Ú
16
" (30 mm)
6.3 Each package contains a
6.6 Place the connector holder and
Note: The connector should be in
6.9 Remove the jacket from the end
6.12 Remove the buffer in small
A
connector (A), strain relief boot
(B), clear strain relief tube (C),
black crimp ring for 3 mm cable
(D) and connector shell (E). The
strain relief tube is not used on
jacketed cable.
connector into the oven.
of the cable.
pieces until
of the buffer remains.
the oven for at least one
minute, but no more than
ten minutes.
B
9
Ú
16
"Ð
C
5
Ú
8
" (14-16 mm)
D
E