6100-W 3M, 6100-W Datasheet - Page 8

• Manufacturer Part Number: 6100-W
• Description: CONN F/OPTIC HOT MELT ST MM
• Manufacturer: 3M

Specifications of 6100-W

• Connector Style: ST
• Simplex/duplex: Simplex
• Mode: Multimode
• Mounting Type: Free Hanging (In-Line)
• Fastening Type: Bayonet Lock
• Ferrule Material: Zirconia, Ceramic
• Features: Hot Melt
• Color: White
• Product: ST Connectors
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Connector Type: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 5400791141; 54007911418; 6100; 6100W; 80-6107-4702-6; 80-6111-2753-3; 80610747026; 80611127533; MF6100

4.0 STÑInstallation on Jacketed Cable
4.1 Turn on the Hot Melt Oven.
4.4 Load the connector onto the ST
4.7 Place the strain relief boot on
4.10 Gather the aramid yarn
The oven requires 5 minutes to
warm up.
connector holder.
the cable.
together and hold them against
the cable jacket.
*
4.2 Open the connector package and
4.5 Latch the connector bayonet
4.8 Score the jacket
4.11 To prevent the buffered fiber
remove the components.
housing to the connector holder.
7
Ú
from being pulled out, lace
the cable through your fingers.
8
" (22 mm) from the end.
8
3
Ú
4
" (19 mm) to
4.3 Each connector package contains
4.6 Place the connector holder and
Note: The connector should be in
4.9 Remove the jacket from the end
4.12 Remove
a connector (A), strain relief boot
(B) and clear strain relief tube
(C). The strain relief tube is not
used on jacketed cable.
connector into the oven.
of the cable.
A
the oven for a least one
minute, but no more than
ten minutes.
5
Ú
8
" (16 mm) of the buffer.
B
C