DM3D-SF Hirose Electric Co Ltd, DM3D-SF Datasheet - Page 11
![CONN MICRO SD R/A PUSH-PULL SMD](/photos/3/6/30684/dm3d-sf_sml.jpg)
DM3D-SF
Manufacturer Part Number
DM3D-SF
Description
CONN MICRO SD R/A PUSH-PULL SMD
Manufacturer
Hirose Electric Co Ltd
Series
DM3r
Specifications of DM3D-SF
Card Type
Secure Digital - microSD™ TransFlash
Number Of Positions
10 (8 + 2)
Connector Type
Connector
Insertion, Removal Method
Push In, Pull Out
Mounting Type
Surface Mount, Right Angle
Features
Switch
Height Above Board
0.061" (1.55mm)
Mounting Feature
Normal, Standard - Top
Contact Finish
Gold
Product
Card Connectors
Mounting Style
PCB
Termination Style
Solder
Number Of Rows
1
Number Of Contacts
8
Current Rating
0.5 A
Contact Material
Copper Alloy
Contact Plating
Gold
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Contact Finish Thickness
-
Ejector Side
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
HR1941TR
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
DM3D-SF(00)A
Manufacturer:
HRS
Quantity:
1
■Recommended temperature profile
■Precautions
1. Do not immerse or clean the entire connector with cleaning solutions as this may affect proper operation of the
2. Do not apply excessive force to the connector when handling or after installation on the PC board.
3. The connectors will reliably connect and operate with the correctly inserted microSD
4. The connector must be correctly mounted on the PC board before the card can be inserted. Do not insert the card in
5. Mounting on the Flexible Printed Circuit (FPC)
6. Small visible residual manufacturing fluids or tooling marks do not affect connector's performance.
7. Repeated insertions and removal of the cards may leave some marks on the card itself. This will have no affect on
● Refer to applicable Operation Manual listed below for additional precautions.
250
200
150
100
(ç)
ejection mechanism and electrical performance of the connector
Follow the correct insertion / ejection procedure for the specific connector in use.
Attempts of incorrect insertion of the card may cause damage to the connector or the card.
the un-mounted connector.
To assure correct performance it is recommended that a flat reinforcement plate 0.3 mm min. thick be used under
the FPC.
the connector performance.
50
DM3CS Series
DM3AT Series
DM3BT Series
DM3D Series
Series
150ç
90 to 120 seconds
Preheating
Time (Seconds)
230ç min.
200ç
Peak:250ç MAX
Operation Manual Number
Soldering
seconds
50
ETAD-F0345
ETAD-F0324
ETAD-F0335
ETAD-F0353
HRS test condition
Solder method
Environment
Solder composition :Paste, 96.5%Sn/3.0%Ag/0.5%Cu
Test board
Metal mask
Number of reflow cycles : 2cycles max.
The temperature profiles shown are based on the above
conditions.
In individual applications the actual temperature may vary,
depending on solder paste type, volume / thickness and board
size / thickness. Consult your solder paste and equipment
manufacturer for specific recommendations.
:Reflow, IR/hot air
:Room air
:Glass epoxy 60mm∞100mm∞1.0mm thick
:0.12mm thick
(Senju Metal Industry, Co., Ltd.'s
Part Number:M705-GRN360-K2-V)
DM3 Series●microSD™ Card Connectors
TM
cards.
11