CV500TDL21 Omron, CV500TDL21 Datasheet - Page 14

• Manufacturer Part Number: CV500TDL21
• Description: Programmable Logic Controller
• Manufacturer: Omron

Specifications of CV500TDL21

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

E5ZE-8j-E
J MOUNTING I/O UNITS
Use appropriate Phillips screwdriver for the screws. Use of an inappropriate screwdriver may damage the screws and cause insufficient
tightening.
Mount the Units in an environment where anti-static electricity countermeasures have been taken.
Store the removed screws carefully and use them again when required.
226
1. Remove the connector mounting screws (2 screws each
2. Remove the casing mounting screws (6 screws).
3. Remove the casing.
4. When CT Input Unit is not required, do not touch the
for a connector) from the Units (except for communication
unit).
corresponding screws. To prevent the studs from
loosening, use a wrench to fix the studs.
Casing securing
screws
Casing securing
Remove the casing after removing
the mounting screws(6 pcs.)
Case
Identification label for
connector
CT INPUT
CONTROL
ALARM
Casing
Mounting studs for the Units
Communication Unit
CT Input Unit
Output Unit
5. Attach the Units in the designated position.
6. Attach the Units to the studs with mounting screws with a
7. Attach the connector to the case using the connector
8. Replace the casing in its original position using six casing
Connect the Units and the E5ZE connector properly.
torque of 0.43 to 0.58 NSm.
mounting screws with a torque of 0.34 to 0.39 NSm.
mounting screws.
: 3 pcs.
: 3 pcs.
: 4 pcs.
The Unit mounting screws are
inserted in the mounting studs
at the factory.
CT Input Unit
(sold separately )
E54-E8CT
Communication Unit
(sold separately)
E53-E01 or E53-E04
(The diagram shows
E53-E04)
Output Unit
(sold separately)
E53-E8Q or E53-E8C
E5ZE-8j-E