E5C2-R20P 110'C 230VAC Omron, E5C2-R20P 110'C 230VAC Datasheet - Page 5

• Manufacturer Part Number: E5C2-R20P 110'C 230VAC
• Description: TEMPERATURE CONTROLLER, 100C
• Manufacturer: Omron

Specifications of E5C2-R20P 110'C 230VAC

• Thermocouple Type: PT100
• Operating Temperature Max: 100°C
• Operating Temperature Min: 0°C
• Output Voltage Max: 250VAC
• Svhc: No SVHC (15-Dec-2010)
• Accuracy: ± 2%
• Accuracy %: 2%
• Approval Bodies: CE, CSA, UL

Precautions
Mounting
Track Mounting (E5C2 with P2CF-08)
When mounting two or more E5C2 models with track-mounting sock-
ets, leave a space of approximately 20 mm on both sides of the
sockets where hooks are located.
Flush Mounting
Insert E5C2 into the square hole of the panel and insert an adapter
from the back so that there will be no space between E5C2 and the
panel. Then, secure the E5C2 with a screw.
Cat. No. H081-E1-02
Panel
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Tightening screw
P2CF-08
In the interest of product improvement, specifications are subject to change without notice.
Hook
20
Duct
The P3G-08 can be wired in the same way as the P2CF-08.
Dismounting
If flush mounted, loosen the screw of the adapter and disengage the
hooks for dismounting.
Temperature Setting
Do not turn the temperature setting knob of the E5C2 with excessive
force, otherwise the stopper of the knob may break.
Others
Do not remove the housing of the E5C2, otherwise the housing may
break.
To clean the surface of the E5C2, use a soft cloth wet with neutral
detergent or alcohol. Do not use any organic solvent, such as paint
thinner or benzine, strong acid or strong alkali to clean the surface of
the E5C2, otherwise the surface of the E5C2 will become damaged.
Temperature Controller
E5C2
5