HS5B-11B IDEC, HS5B-11B Datasheet - Page 7

• Manufacturer Part Number: HS5B-11B
• Description: SWITCH, SAFETY INTERLOCK, 1NO/1NC, 10A
• Manufacturer: IDEC

Specifications of HS5B-11B

• Contact Configuration: SPST-NO / SPST-NC
• Contact Voltage Ac Max: 250V
• Contact Voltage Dc Max: 250V
• Contact Current Ac Max: 10A
• Contact Current Dc Max: 8A
• Switch Terminals: Screw
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

• In order to avoid electric shock or a fire, turn the power off before
• If relays are used in the circuit between the safety switch and the
• Regardless of door types, do not use the safety switch as a door
• Do not apply an excessive shock to the switch when opening or
• A shock to the door exceeding 1,000 m/sec
• For connection of wires, unscrew the cover. Unnecessary loosening
For Rotating Head Directions
• The head of the HS5B can be rotated in 90° increments after remov-
Wire Connection
• The HS2B has 3 conduit ports, which are closed as a part of the
• Make an opening for wire connection by breaking one of the con-
• When breaking the conduit port, take care not to damage the con-
• Cracks or burrs on the conduit entry may deteriorate the housing
www.idec.com
installation, removal, wire connection, maintenance, or inspection
of the switch.
load, consider degrees of the danger and use safety relays, since
welded or sticking contacts of standard relays may invalidate the
functions of the safety switch.
stop. Install a mechanical door stop at the end of the door to protect
the safety switch against excessive force.
closing the door.
cause the contacts of the switch to chatter, and a malfunction of the
switch may occur.
of other screws may cause a malfunction of the switch.
ing the 4 screws on the corners of the head. Prevent entry of foreign
objects into the switch during removal of the head. Tighten these
screws with torque designated in the instruction sheet. Improper
torque may cause errors.
molded switch housing.
duit-port knockouts on the switch housing using a screwdriver.
tact block or other parts inside the switch.
protection against water.
Position
Initial
Safety Products
Mounting in 3 Different Positions
USA: (800) 262-IDEC or [phone], Canada: (888) 317-IDEC
2
(approx. 100G) may
Interlock Switch Safety Precautions
Operation Precautions - for all series
HS5B Precautions
HS2B Precautions
• Do not place a PLC in the circuit between the safety switch and the
• Do not disassemble or modify the switch. It may cause a breakdown
• Prevent foreign objects such as dust and liquids from entering the
• If the operating atmosphere is contaminated, use a protective cover
• Entry of a considerable amount of foreign objects into the switch
• Do not store the switches in a dusty, humid, or organic-gas atmo-
Minimum Radius of Hinged Doors
• When changing to another conduit port, close the unused opening
load. The safety security can be endangered in the event of a mal-
function of the PLC.
or an accident.
switch while connecting a conduit or wiring.
to prevent the entry of foreign objects into the switch through the
actuator entry slots.
may affect the mechanism of the switch and cause a breakdown.
sphere.
with an optional plug (Type No. HS9Z-P1).
Door Hinge
HS9Z-A52
Actuator
Precautions
B1-43
B1