MPAXD000 Red Lion Controls, MPAXD000 Datasheet - Page 19
![no-image](/images/no-image-200.jpg)
MPAXD000
Manufacturer Part Number
MPAXD000
Description
Voltage-Current Input Module
Manufacturer
Red Lion Controls
Specifications of MPAXD000
Accessory Type
Analog Input Module
Signal Input Type
Selectable Voltage
No. Of Analog Outputs
5
Character Size
0.56"
Accuracy
0.03% of reading + 0.03 μA to 0.5% of reading + 0.3 μA @ 18 to 28 °C, 0.03% of reading +30 μV to 0.05% of reading +30 mV @ 18 to 28 °C, 0.05% of reading +30 Megohm to 0.05% of reading +1 Ohms @ 18 to 28 °C
Brand/series
MPAX Series
Display Type
LED
Impedance, Input
100 Ohms to 10 Kiloohms
Measuring Range
± 200 μADC to ± 2 ADC, ± 200 mVDC to ± 300 VDC, 100 Ohms to 10 Kiloohms
Resolution
10 nA to 0.1 mA, 10 μV to 10 mV, 0.01 Ohms to 1 Ohms
Standards
cULus Listed, CE Certified
Voltage, Working
85 to 250 VAC
Sealing
NEMA 4/IP65
No. Of Analog Inputs
5
Rohs Compliant
Yes
For Use With
EPAX 5 Digit Displays
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
transition to activate (momentary action). The Totalizer retains a running sum of
each batch operation until the Totalizer is reset. When this function is selected,
the normal operation of the Totalizer is overridden.
zero. The Totalizer then continues to operate as it is configured. This selection
functions independent of the selected display.
"
"
"
"
"
"
"
"
"
*:#83
*:#83
*:#83
*:#83
*:#83
*:#83
*:#83
*:#83
*:#83
The Input Display value is one time added (batched) to the Totalizer at
When activated (momentary action),
?8F,?
"8F,?
?8656
#6563
#656/
&8656
:C$(
?8FA
<"6
STORE BATCH READING IN TOTALIZER
#
#
#
#
#
#
#
#
#
SYNCHRONIZE METER READING
RESET AND ENABLE TOTALIZER
the Totalizer resets to zero. The Totalizer continues to
operate while active (maintained action). When the user
input is released, the Totalizer stops and holds its value. This
selection functions independent of the selected display.
SELECT TOTALIZER DISPLAY
(maintained action). When the user input is released, the
Input Display is returned. The DSP key overrides the active
user input. The Totalizer continues to function including
associated outputs independent of being displayed.
(maintained action). When the user input is released, the
Totalizer stops and holds its value. This selection functions
independent of the selected display.
contents, and locks the state of all outputs as long as activated
(maintained action). The serial port continues data transfer.
(maintained action). When the user input is released, the
Input Display returns. The DSP key overrides the active
user input. The Maximum continues to function
independent of being displayed.
SELECT MAXIMUM DISPLAY
continue as long as activated (maintained action).
(maintained action). When the user input is released, the
meter synchronizes the restart of the A/D with other
processes or timing events.
When activated (momentary action),
The Totalizer display is selected as long as activated
The Totalizer continues to operate as long as activated
The meter disables processing the input, holds all display
The Maximum display is selected as long as activated
HOLD ALL FUNCTIONS
The shown display is held but all other meter functions
The meter suspends all functions as long as activated
ENABLE TOTALIZER
RESET TOTALIZER
HOLD DISPLAY
#&:&6
flashes and the Totalizer resets to
#&:&6
"
"
#8656
flashes and
>3
>3
<"6
#
#
18
value. This selection functions independent of the selected display. The DSP key
overrides the active user input display but not the Maximum function.
the Minimum reading is set to the present Input Display
value. The Minimum function then continues from that value.
This selection functions independent of the selected display.
Minimum readings are set to the present Input Display value. The Maximum and
Minimum function then continues from that value. This selection functions
independent of the selected display.
intensity level (of 4). The four levels correspond to Display Intensity Level (
#$%
Input/ Function Key, is not retained at power-down, unless Quick Programming
or Full Programming mode is entered and exited. The meter will power-up at the
last saved intensity level.
the Maximum resets to the present Input Display value. The
Maximum function then continues from that value. This
selection functions independent of the selected display.
"
"
"
its value. This selection functions independent of the selected display. The DSP
key overrides the active user input display but not the Minimum function.
"
"
*:#83
*:#83
*:#83
*:#83
*:#83
When activated (momentary action),
When activated (momentary action),
When activated (momentary action), the display intensity changes to the next
When activated (momentary action),
) settings of 0, 3, 8, and 15. The intensity level, when changed via the User
?8,&G
#8FA
?8,5
#8,5
#8F,
RESET, SELECT, ENABLE MAXIMUM DISPLAY
RESET, SELECT, ENABLE MINIMUM DISPLAY
#
#
#
#
#
CHANGE DISPLAY INTENSITY LEVEL
RESET MAXIMUM AND MINIMUM
is set to the present Input Display value. Minimum continues
from that value while active (maintained action). When the
user input is released, Minimum detection stops and holds
(maintained action). When the user input is released, the
Input Display is returned. The DSP key overrides the active
user input. The Minimum continues to function
independent of being displayed.
is set to the present Input Display value. Maximum continues
from that value while active (maintained action). When the
user input is released, Maximum detection stops and holds its
SELECT MINIMUM DISPLAY
When activated (momentary action), the Minimum value
When activated (momentary action), the Maximum value
The Minimum display is selected as long as activated
RESET MAXIMUM
RESET MINIMUM
#&:&6
#&:&6
#&:&6
flashes and
flashes and
flashes and the Maximum and
"
"
"
"
?8,&G
#8FA
#8,5
#8F,
>3
>3
>3
>3
#
#
#
#
!"