E5-024-C0400 EATON CUTLER HAMMER, E5-024-C0400 Datasheet - Page 3

• Manufacturer Part Number: E5-024-C0400
• Description: Totalizing Counter
• Manufacturer: EATON CUTLER HAMMER

Specifications of E5-024-C0400

• No. Of Digits / Alpha: 8
• Digit Height: 8mm
• Counting Speed: 30Hz
• Operating Temperature Range: -10°C To +55°C
• Meter Signal Input: Pulse
• Character Size: 0.31"
• Ip/nema Rating: 65
• Panel Cutout Height: 0.87"
• Supply Voltage Range: 10VAC To 260VAC / 10VDC To 260VDC

Reset input, active for negative edge
Contact input / Open Collector NPN
(switching at 0 V DC)
Low level:
High level:
Min. pulse duration:
Input resistance:
Operating mode switch (Mode)
Contact input / Open Collector NPN
(switching at 0 V DC)
Low level:
High level:
Input resistance:
Function:
Table 3
Function: see Table 3
Optocoupler input 10 – 260V AC/DC
galvanic isolation, active for High signal
Min. pulse duration:
Max frequency:
Low level:
High level:
Input resistance:
Common AC/DC, common connection for the
optocoupler inputs (screw terminals 1 and 3).
Reset key enable
Contact input / Open Collector NPN
(switching at 0 V DC)
Low level:
High level:
Input resistance:
Input not active:
Input in contact with GND:
MN05401007E
Screw terminal
Model
E5024C0408
Designation
counting
AC/DC
INP A
No. 1
0 – 0.7V DC
3 – 30V DC
50 ms
approximately 2.2 MOhm
0 – 0.7V DC
3 – 5V DC
approximately 2.2 MOhm
see Table 2
16 ms
approximately 30 Hz
0 – 2V AC/DC
10 – 260V AC/DC
approximately 160 kOhm
0 – 0.7V DC
3 – 5V DC
approximately 2.2 MOhm
Reset key disabled
Reset key enabled
Common
AC/DC
No. 2
reset
AC/DC
INP B
No. 3
Reset key enable
Contact input / Open Collector NPN
(switching at 0 V DC)
Low level:
High level:
Input resistance:
Input not active:
Input in contact
with GND:
GND connection common for all inputs
(–) external power supply for the LCD backlight option
(+) external power supply for the LCD backlight
option(24V DC ±20%, 50 mA)
Function: see table 3, active for negative edge
Contact input / Open Collector NPN
(switching at 0 V DC)
Low level:
High level:
Min. pulse duration: 50 ms
Input resistance:
Input High:
Input Low :
Common GND connection for screw terminal 4
(reset key locking input) and screw terminal 5 (reset
input).
(–) external power supply for the backlight option
(+) external power supply for the backlight option
(24 V ±20%, 50 mA)
NPN reset
key locking
input, Contact
with GND. key
free.
Reset Enable
No. 4
not
connected
Reset
No. 5
0 – 0.7V DC
3 – 5V DC
approximately. 2.2 MOhm
Reset key disabled
Reset key enabled
0 – 0.7V DC
3 – 5V DC
approximately 2.2 MOhm
- - -
Reset of the counter
Dynamic resetting behavior
No. 6
GND
No. 7
BL
–
No. 8
BL
+
3