PAXR0000 Red Lion Controls, PAXR0000 Datasheet - Page 23

• Manufacturer Part Number: PAXR0000
• Description: Rate Counter
• Manufacturer: Red Lion Controls
• Type: Rate Indicatorr

Specifications of PAXR0000

• No. Of Digits / Alpha: 6
• Signal Input Type: Pulse
• Character Size: 0.56"
• Ip/nema Rating: IP65 / NEMA 4X
• Panel Cutout Height: 1.77"
• Display Font Color: Red
• Panel Cutout Width: 3.62"
• Counter Supply Voltage: 85-250VAC
• Accuracy: ±0.01% %
• Connection Type: Cage-Clamp
• Cut Out, Panel: 1/8 DIN
• Digit Height: 0.56
• Dimensions: 4.2"L×3.8"W×1.95"H
• Display Digit Height: 0.56 "
• Display Type: LED
• Function: Rate Indicator
• Indicator Type: Rate Meter
• Number Of Digits: 6
• Primary Type: Electronic
• Range, Measurement: 0 to 99999
• Special Features: Programmable Function Keys
• Temperature, Operating, Range: 0 to 50 °C
• Termination: Cage Clamp
• Voltage, Supply: 85 to 250 VAC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant


Assignment (
assigned counter is reset by a Counter Auto reset generated by another setpoint.

activates. (Example: SP1 deactivates when SP2 activates and SP4 when SP1
activates.) The last setpoint will wrap around to the first.
PAXC & I: SETPOINT RESET WITH DISPLAY RESET *
PAXC & I: SETPOINT RESET WHEN SPn+1 ACTIVATES *


Select
Select


, so the setpoint output will deactivate (reset) when the Setpoint
, so the setpoint output will deactivate (reset) when SPn +1





) counter display resets. The only exception is if the
HIGH ACTING WITH NO DELAY
LOW ACTING WITH NO DELAY
HIGH ACTING WITH TIMEOUT


PAXR & I: SETPOINT (ALARM) FIGURES FOR RATE


(For Reverse Action, The Alarm state is opposite.)
23

activates and then times out (deactivates). This function may only be used if the
SPn+1 is programmed for Setpoint Action of
when SP2 is activated and then times out.) The last setpoint will wrap around
to the first.
*

PAXC & I: SETPOINT RESET WHEN SPn+1 DEACTIVATES *
Factory Setting can be used without affecting basic start-up.
Select

, so the setpoint output will deactivate (reset) when SPn +1


LOW ACTING WITH TIMEOUT
LOW ACTING WITH DELAY
HIGH ACTING WITH DELAY



. (Example SP1 deactivates