SNAP-PAC-R2-W OPTO 22, SNAP-PAC-R2-W Datasheet - Page 6
![no-image](/images/manufacturer_photos/0/4/498/opto_22_sml.jpg)
SNAP-PAC-R2-W
Manufacturer Part Number
SNAP-PAC-R2-W
Description
Programmable Controller Wireless
Manufacturer
OPTO 22
Specifications of SNAP-PAC-R2-W
Accessory Type
Programmable Automation Communication
Signal Input Type
Ethernet, RS-232
Rohs Compliant
Yes
For Use With
SNAP PAC System
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
PAGE
6
System Architecture (continued)
The network shown in this diagram requires PAC Control Professional, PAC Display Professional, and OptoDataLink.
SNAP PAC R-series Controller Segmenting Ethernet Networks
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2007–2011 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
This diagram shows two SNAP PAC I/O units connected
together over an Ethernet network and controlled by a SNAP
PAC R-series controller running a PAC Control strategy.
The controller is also connected to a larger, separate
enterprise Ethernet network to provide data to PCs running
Opto 22’s PAC Display HMI software, OptoOPCServer, and
OptoDataLink. Sitting between the two networks, the SNAP
SNAP PAC R1-series
SNAP PAC R-series controller communicates with host computers through one network
interface and controls I/O both directly on the rack and through the other Ethernet interface.
Using a Wired+Wireless PAC, one of these networks can be a wireless one (see the next page).
Field devices
location #1
PC running PAC
Display Professional
Ethernet switch
Ethernet switch,
network #1
Enterprise Network
Control Network
SNAP PAC R-Series Controllers
PC running
OptoOPCServer
and OptoDataLink
PAC R-series controller segments enterprise traffic from the
control network.
If you use a Wired+Wireless PAC (SNAP-PAC-R1-W or
SNAP-PAC-R2-W), one of these networks can be a wireless
LAN. See the following page for an example.
Additional I/O units are controlled by the
R-series controller on an isolated network.
Field devices
location #2