01230.9-01 STEGO, 01230.9-01 Datasheet - Page 13

• Manufacturer Part Number: 01230.9-01
• Description: Humidity And Temperature Control
• Manufacturer: STEGO

Specifications of 01230.9-01

• Mounting Type: DIN Rail
• Operating Voltage Max: 120V
• Operating Temperature Max: 60°C
• Output Type: Temperature
• Supply Voltage: 120VAC
• Temperature Accuracy ±: 1K
• Humidity Range: 50 To 90% RH
• Operating Temperature Min: 0°C
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Specifications are subject to change without notice. Suitability of this product for its intended use and any associated risks must be determined by the end customer/ buyer in its final application.
cooling device with
temperature limiter
Load, e.g. heater,
STEGO, Inc. · 1395 South Marietta Parkway · Building 800 · Marietta, GA 30067 · Tel: [phone] · Fax: [phone]
01000.0-00
01001.0-00
Part No.
DC 48V
- + 1 2 - +
/
Electronic
SM 010
relay
Toll free: 1-888-783-4611 (US & Canada only) · www.stegousa.com
DC 48V
U s
hygrostat, or pressure
Control contact,
e.g. thermostat,
The SM 010 Electronic Relay is used for switching high powered DC operated equipment, such
as heaters, up to 16 amps. A separate conventional switch contact is used as controller (e.g.
thermostat, hygrostat). The electronic relay is available in 24VDC and 48VDC versions.
| |
regulator
16 Amp DC switching capacity
Variety of applications
Compact design
DIN rail mountable
Technical Data
Contact type
Contact resistance
Service life
EMC
Connection
Housing
Mounting
Mounting position
Operating / Storage temperature
Dimensions
Weight
Protection type
Approvals
Operating voltage
48VDC (38-56VDC)
24VDC (20-28VDC)
SM 010 Electronic Relay (24VDC & 48VDC)
Wiring examples
cooling device without
temperature limiter
Load, e.g. heater,
NO - normally open (Relay/MOSFET)
< 10m
> 100,000 cycles
acc. to EN 55014-1-2, EN 61000-3-2, EN 61000-3-3
6-pole terminal, clamping torque 0.5Nm max.:
solid wire - AWG 14 max. (2.5mm²)
stranded wire (with wire end ferrule) - AWG 16 (1.5mm²)
plastic, UL 94V-0, light grey
clip for 35mm DIN rail, EN 60 715
vertical
-49 to +158°F (-45 to +70°C)
2.6 x 2.0 x 1.8” (67 x 50 x 46mm)
approx. 3.0 oz. (85g)
IP20
VDE intended
˜
Electronic
SM 010
relay
Max. Switching capacity
16A @ 56VDC
16A @ 28VDC
hygrostat, or pressure
Control contact,
e.g. thermostat,
regulator