01230.9-01 STEGO, 01230.9-01 Datasheet - Page 46

• Manufacturer Part Number: 01230.9-01
• Description: Humidity And Temperature Control
• Manufacturer: STEGO

Specifications of 01230.9-01

• Mounting Type: DIN Rail
• Operating Voltage Max: 120V
• Operating Temperature Max: 60°C
• Output Type: Temperature
• Supply Voltage: 120VAC
• Temperature Accuracy ±: 1K
• Humidity Range: 50 To 90% RH
• Operating Temperature Min: 0°C
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Light with on/off switch
Specifications are subject to change without notice. Suitability of this product for its intended use and any associated risks must be determined by the end customer/ buyer in its final application.
3.93” (100 mm)
STEGO, Inc. · 1395 South Marietta Parkway · Building 800 · Marietta, GA 30067 · Tel: [phone] · Fax: [phone]
02600.0-00
02600.9-00
02601.0-00
02601.9-00
Part No.
Light with motion sensor
Toll free: 1-888-783-4611 (US & Canada only) · www.stegousa.com
| |
(1) Standard screw mounting to DIN rail
(2) 2 self-adhesive (Part No. 09515.0-00) or magnet (Part No. 09516.0-00) mounting plates
(3) Self-adhesive light holder with hook and 6 ft. power cord (230VAC - Part No. 03410.0-00,
The DL 026 dual light is available with on/off switch or motion sensor (the motion sensor ver-
sion was designed to eliminate the need for a door switch). The lamp is removable from its
base and, with the use of an optional additional power cord, can be used as a hand lamp.
This versatile light was also designed to include a variety of mounting options.
120VAC - Part No. 03411.0-00). By using the holder/power cord kit, the light can be used as a hand lamp.
1)
ically turns on the light. The sensor is factory pre-set to turn the light off 3 minutes after all motion ceases. The
motion sensor does not detect movement through glass, allowing for installation in enclosures with glass doors.
Technical Data
Power consumption
Luminosity
Lamp type
Service life
Switch
Connection
Housing
Standard mounting (included)
Optional mounting
Mounting position
Operating temperature
Storage temperature
Weight
Protection class
Protection type
Accessories
Versatile – base lamp or hand lamp
Long-life energy saving lamp
On/off switch or motion sensor
The Passive Infrared (PIR) motion sensor detects the motion of the enclosure door being opened and automat-
Operating voltage
230VAC, 50/60Hz
120VAC, 50/60Hz
230VAC, 50/60Hz
120VAC, 50/60Hz
20W (~ 100W incandescent bulb)
1000Lm
compact fluorescent, E27 base, electronic ballast
10,000 hrs.
on/off push switch or PIR motion sensor
6-pole terminal, AWG 14 max (2.5 mm²) - torque 0.5Nm max.
for hard wiring of 1 light or 2 lights in parallel
plastic, UL 94V-0, light grey
screw mounting on 35mm DIN rail or sheet metal
with self-adhesive or magnet mounting plates (see below)
variable
-4 to +122°F (-20 to +50°C)
-49 to +158°F (-45 to +70°C)
approx. 1.3 lbs. (600g)
II (double insulated)
IP20
see below
DL 026 Dual Light
motion sensor
motion sensor
Switch type
on/off
on/off
1)