45593-1600 Molex Inc, 45593-1600 Datasheet - Page 16

• Manufacturer Part Number: 45593-1600
• Description: CONN PLUG 16POS .8MM VERT PCB
• Manufacturer: Molex Inc
• Series: HandyLink™ 45593r

Specifications of 45593-1600

• Connector Style: Plug
• Connector Type: Handylink
• Number Of Positions: 16
• Mounting Type: Through Hole
• Termination: Solder
• Contact Finish: Gold
• Color: Black
• Housing Material: Thermoplastic, High Temperature
• Insulation Resistance: 1000 M Ohms
• Mounting Angle: Vertical
• Operating Temperature Range: - 40 C to + 85 C
• Number Of Positions / Contacts: 16
• Pitch: 0.8 mm
• Contact Plating: Gold, Tin
• Contact Material: High Performance Alloy (HPA)
• Gender: Male
• Current Rating: 1.5 A
• Mounting Style: Through Hole
• Termination Style: Solder
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Contact Finish Thickness: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 045593-1600; 045593-1600-E; 0455931600; 0455931600-E; 45593-1600-E; 455931600; 455931600-E; WM17126

REVISION:
DOCUMENT NUMBER:
A
o Supplemental Latching and Alignment Posts
accelerations or strong vibrations during use, a cup-style receptacle needs to be considered to
adequately protect the connection interface. The cup-style receptacle should incorporate
separate external latching features and supplemental alignment posts similar to those illustrated
below. NOTE: The cup-style receptacle’s dimensions must restrict angular misalignment, when
mated, to within the limits specified in Section 4.2.
posts from the base surface of the cup-style receptacle. Further, the alignment posts’
centerlines must lie in the same plane as the centerlines of the plug connector posts to provide
the greatest benefits. Guide ribs are necessary to prevent front-to back rocking motion as the
device is loaded into the cup-style receptacle.
to avoid misalignment. If this is not achieved, excessive wear between the connector housings
and/or electrical discontinuities may occur.
AS-44828-001
Where the mass of the end product is greater than 1000 grams and is subject to sudden
Supplemental alignment posts must be longer than the protrusion of the plug connector
NOTE: The fastening of the cup-style receptacle to the over-molded plug must be kept tight
ECR/ECN INFORMATION:
EC No:
DATE:
Supplemental alignment posts
Figure 13. Use of a cup-style receptacle for added support and alignment
6/24/04
UCP2004-2588
Cup-style receptacle
APPLICATION SPECIFICATION
PRELIMINARY HANDYLINK™
TITLE:
CREATED / REVISED BY:
T. Gregori/ M. Simmel
HANDYLINK™I/O CONNECTOR SYSTEM
APPLICATION SPECIFICATION
Guide ribs (each side)
Marc Simmel
CHECKED BY:
External latching feature (each side)
TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC
APPROVED BY:
Joe Comerci
SHEET No.
16
of
21