10054542-001LF FCI, 10054542-001LF Datasheet - Page 6

• Manufacturer Part Number: 10054542-001LF
• Description: CONN RECEPT SAS 22POS VERT PCB
• Manufacturer: FCI

Specifications of 10054542-001LF

• Connector Style: Receptacle
• Connector Type: SAS
• Number Of Positions: 22
• Mounting Type: Through Hole
• Termination: Solder
• Contact Finish: Gold
• Contact Finish Thickness: 3µin (0.08µm)
• Product: SAS Connectors
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 609-1549

7.0
NUMBER
TITLE
Copyright
Form E-3334
Rev F
7.2
7.3
7.4
ENVIRONMENTAL CONDITIONS
GS-12-239
After exposure to the following environmental conditions in accordance with “Table 1 – Qualification Test Matrix”,
the product shall show no physical damage and shall meet the electrical and mechanical requirements in sections
6 and 7. Unless specified otherwise the products shall be mated during exposure.
7.1
FCI
Perform in accordance with EIA 364-32C. The following details shall apply:
a. Number of cycles: 5
b. Temperature range: -55 to + 85
c. Time at each temperature: 30 minutes minimum
d. Transfer time: 30 seconds maximum
Mated samples are to be exposed to cyclical humidity and temperature in accordance with EIA 364-31B.
A cycle consists of the following steps.
a. 2 hour ramp from 25°C at 80%-98% RH to 65°C at 90%-98% RH
b. 4 hour dwell at 65°C at 90%-98% RH
c. 2 hour ramp down to 25°C at 80%-98% RH
d. 2 hour dwell at 25°C at 80%-98% RH
Perform in accordance with EIA 364-17B. Headers and receptacles shall remain mated without any
a. Temperature: 85°C
b. Duration: 500 hours
Expose samples to gas mixture per Telcordia GR-1217-CORE, November 1995, Section 9.1.3 as follows:
a. Temperature: 30°C
b. Relative humidity: 70%
c. Mandatory readings after the 10
d. Gas compositions, per Central Office requirements:
Case 1: Backpanel and Orthogonal Applications
Un-mated backpanel connectors are to be exposed to gas mixture for 10 days, then mated and exposed
Case 2: Coplanar Applications
Each connector gender is to be exposed to gas mixture in the unmated condition for 10 days, then mated
Thermal Shock:
Cyclical Humidity and Temperature:
Samples are to be subjected to 50 cycles of 10-hour duration for a total of 500 hours.
Temperature Life:
electrical load. The following details shall apply:
Industrial Mixed Flowing Gas (Class IIA, 4-gas):
for an additional 10 days.
to an unexposed connector for a 10 day additional gas exposure and the remainder of the test.
AirMax VS
Gas Type
TYPE
®
NO
H
SO
Cl
Connector System, press-fit products
2
S
2
2
2
PRODUCT SPECIFICATION
Gas Concentration
200 ppb
100 ppb
10 ppb
10 ppb
o
th
C
and 20
PDM: Rev:F
th
days
STATUS:
PAGE
AUTHORIZED BY
STATUS
Tan Chen Hong
Released
6 of 11
UNRESTRICTED
Printed: Oct 04, 2008
REVISION
DATE
GS-01-001
30 Sep 08
F
.