10054542-001LF FCI, 10054542-001LF Datasheet - Page 7

• Manufacturer Part Number: 10054542-001LF
• Description: CONN RECEPT SAS 22POS VERT PCB
• Manufacturer: FCI

Specifications of 10054542-001LF

• Connector Style: Receptacle
• Connector Type: SAS
• Number Of Positions: 22
• Mounting Type: Through Hole
• Termination: Solder
• Contact Finish: Gold
• Contact Finish Thickness: 3µin (0.08µm)
• Product: SAS Connectors
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 609-1549

NUMBER
TITLE
Copyright
Form E-3334
Rev F
7.5
7.6
7.7
7.8
7.9
GS-12-239
FCI
Case 1: Backpanel and Orthogonal Applications
Un-mated backpanel connectors alone shall be subjected to dust exposure.
Case 2: Coplanar Applications
Each connector gender is to be subjected to dust exposure in the unmated condition, then mated to an
Vibration
Perform in accordance with Telcordia GR-1217-CORE, November 1995, Sections 6.3.5 and 9.1.2.1. The
following details shall apply:
a. Vibration amplitude: 1.5 mm (0.06 inch) double amplitude or 10G acceleration
b. Frequency range: 10 to 500 to 10 Hz
c. Sweep time: 15 minutes per cycle
d. Duration: 8 hours along each of three orthogonal axes (24 hours total)
e. Mounting: rigidly mounted assemblies
f.
Mechanical Shock
Perform in accordance with Telcordia GR-1217-CORE, November 1995, Sections 6.3.5 and 9.1.2.1. The
following details shall apply:
a. Amplitude: half sine 30G
b. Duration: 11 milliseconds
c. Number of shocks: 3 shocks along each of three orthogonal axis (18 total)
d. Mounting: rigidly mounted assemblies
e. Take resistance measurements after shock in each axis
f.
Durability
Perform in accordance with EIA 364-09C. Use standard laboratory procedure as applicable to the
specific product. The following details shall apply:
a. Number of cycles: See Table 1 (200 total mating cycles)
b. Cycling rate: 12.5 cm (5 inches) per minute
Dust Contamination
Perform in accordance with Telcordia GR-1217-CORE, November 1995, Section 9.1.1.1 & Table 9-1.
Samples shall be subjected to a one-hour dust exposure using a benign dust composition as specified in
Table 9-1 of Telcordia GR-1217-CORE, November 1995, and in accordance with the following:
unexposed connector for the remainder of the test sequence. Alternatively, in order to reduce the need
for additional samples, the mating halves may be subjected to dust exposure and re-mated to each other
for the remainder of the test sequence.
Disturb
Perform in accordance with Telcordia GR-1217-CORE, November 1995, Section 9.1.3.3 paragraph 7.
The mated connectors shall be subjected to an interface disturbance that consists of slightly unmating the
sample approximately 0.10 mm (0.004 inch). The sample is then reseated and measurements are made.
AirMax VS
No discontinuities greater than 1 micro-second
No discontinuities greater than 1 micro-second
TYPE
®
Connector System, press-fit products
PRODUCT SPECIFICATION
PDM: Rev:F
STATUS:
PAGE
AUTHORIZED BY
STATUS
Tan Chen Hong
Released
7 of 11
UNRESTRICTED
Printed: Oct 04, 2008
REVISION
DATE
GS-01-001
30 Sep 08
F
.