63-23-710-8 SOLA HEVI DUTY, 63-23-710-8 Datasheet - Page 5

• Manufacturer Part Number: 63-23-710-8
• Description: Voltage Regulator/Power Conditioner
• Manufacturer: SOLA HEVI DUTY
• Series: MCRr

Specifications of 63-23-710-8

• Suppressor Type: Power Line Conditioner
• Input Voltage: 415VAC
• Output Voltage: 110V
• Width: 228.6mm
• Height: 457.2mm
• Output Voltage 3: 220V
• Output Type: Fixed
• External Height: 18"
• Output Power: 1000 VA
• Input Voltage (nominal): 380 V
• Features: Harmonic Filtering
• Mounting Type: Surface Mount
• Voltage Regulation: +/- 3 %
• Voltage Regulation Accuracy: +/- 3 %
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

The SolaHD Micro/Mini Computer Regulator (MCR) provides voltage regulation
and isolation from both transverse and common mode noise for any type of load.
It also suppresses transients with ferroresonant, protects overloads, and serves
as a portable dedicated line. It is the ultimate in ac power conditioning equipment.
All regulators generate considerable heat and depend on the natural draft air
circulation for adequate cooling. It is important that ventilation openings not be
obstructed. Mounting in a confined or poorly ventilated space should be avoided
unless special provisions have been made for ventilation.
The MCR units are equipped with one input on/off line switch, one 3-wire
grounding type input cord/plug, and two or more 3-wire grounding output recep-
tacles. No additional connections are required except for the customer’s output
cable(s).
The neutral side of the output voltage is grounded to the regulator chassis, as are
the input cord and output receptacle ground connections.
Table 1: Plugs & Receptacles
Model Number
63-13-650-6
4.0 Installation Instructions
The unit is rated for 50 Hz operation only! Operation at 60 Hz
will damage the unit and void any warranty.
3.0 Introduction
5-15P
Plug
MCR Portable Series Instruction Manual • 5
5-15R (4 PCS)
Receptacle