SNAP-PS24 OPTO 22, SNAP-PS24 Datasheet - Page 2

• Manufacturer Part Number: SNAP-PS24
• Description: POWER SUPPLY, SWITCH MODE, 24V
• Manufacturer: OPTO 22
• Type: Power Suppliesr

Specifications of SNAP-PS24

• Power Supply Type: Switching
• Power Supply Output Type: Fixed
• No. Of Outputs: 1
• Output Voltage: 24V
• Output Current: 750mA
• Input Voltage: 95V AC To 130V AC
• Length: 102.86mm
• Width: 44.44mm
• Height: 106.69mm
• Current, Output: 0.75 A
• Dimensions: 4.05 W × 4.89 H × 1.75 D In.
• Frequency, Operating: 47-63 Hz
• Fuse Type: Opto 22 PN: SNAP-FUSE1ABVendor PN: GDC-1A (Bussman)
• Mounting Type: Panel
• Temperature, Operating: to 70 °C
• Voltage, Input: 95-130 VAC
• Voltage, Output: 24 VDC
• Weight: 2.1 Lbs.
• Lead Free Status / RoHS Status: na

DATA SHEET
Form 953-030801
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • Phone: [phone] • (800) 321-OPTO • Fax: [phone] • www.opto22.com
Installation
MOUNTING AND WIRING
1. Mount the SNAP-PS24 or SNAP-PS24U power supply
2. The white and red wire is the positive wire (24 VDC).
in a location where the attached output power wires
will reach the field connector for SNAP analog
modules or the terminal strip on SNAP mounting
racks that have the additional fi eld wiring terminal
strips.
The white and black wire is the negative wire (24 VDC
return). For specifi c loop power wiring information,
Inside Sales: (800) 321-OPTO • Product Support: (800) TEK-OPTO • [phone] • Fax: [phone] • E-mail: [e-mail]
FIGURE 1 - SNAP-PS24
FIGURE 2-SNAP-PS24
3. Using the removable input power connector on top of
please refer to Opto 22 form number 784 for SNAP racks
that have the additional fi eld wiring terminal strip (Figure
1), or refer to form numbers 1065 and 1066 if wiring
directly to the fi eld connectors on SNAP analog modules
(Figure 2). See the next page for SNAP-PS24U wiring
diagrams.
the power supply, apply 120 volts of AC power between
the two terminals marked “AC.” The ground terminal
should be connected to ground.
POWER SUPPLY
SNAP
page 2/7