SNAP-PS24 OPTO 22, SNAP-PS24 Datasheet - Page 4

• Manufacturer Part Number: SNAP-PS24
• Description: POWER SUPPLY, SWITCH MODE, 24V
• Manufacturer: OPTO 22
• Type: Power Suppliesr

Specifications of SNAP-PS24

• Power Supply Type: Switching
• Power Supply Output Type: Fixed
• No. Of Outputs: 1
• Output Voltage: 24V
• Output Current: 750mA
• Input Voltage: 95V AC To 130V AC
• Length: 102.86mm
• Width: 44.44mm
• Height: 106.69mm
• Current, Output: 0.75 A
• Dimensions: 4.05 W × 4.89 H × 1.75 D In.
• Frequency, Operating: 47-63 Hz
• Fuse Type: Opto 22 PN: SNAP-FUSE1ABVendor PN: GDC-1A (Bussman)
• Mounting Type: Panel
• Temperature, Operating: to 70 °C
• Voltage, Input: 95-130 VAC
• Voltage, Output: 24 VDC
• Weight: 2.1 Lbs.
• Lead Free Status / RoHS Status: na

DATA SHEET
Form 953-030801
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • Phone: [phone] • (800) 321-OPTO • Fax: [phone] • www.opto22.com
Installation
DIN-RAIL MOUNTING (OPTIONAL)
1. For DIN-rail mounting, removethe fourscrews that fasten
2. In place of the panel mounting base plate, use the four
3. Mount the SNAP-PS24 or SNAP-PS24U on the DIN rail
the panel mounting base plate to the power supply
(Save screws.) Remove panel mounting base plate.
screws removed in step 1 to fasten the DIN-rail adapter
to the power supply.
as close as possible to the rack and brain board assembly.
The SNAP-PS24 is shown below as an example.
Inside Sales: (800) 321-OPTO • Product Support: (800) TEK-OPTO • [phone] • Fax: [phone] • E-mail: [e-mail]
DIN-RAIL ADAPTER ASSEMBLY (OPTIONAL)
POWER SUPPLY
SNAP
page 4/7