NT625-KBA01 Omron, NT625-KBA01 Datasheet - Page 14

• Manufacturer Part Number: NT625-KBA01
• Description: NT631 CHEM RESISTANT COVER
• Manufacturer: Omron

Specifications of NT625-KBA01

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

14
Get the Most from Your Omron PLCs
The NT21/NT31/NT631 operator interface products create superior Omron PLC solutions
by taking advantage of features that other HMI products simply cannot offer in an Omron
system. Our HMI products are designed with the same attention to quality and
performance that go into our broad line of industry leading PLCs. Omron's NT21/31/631
also offer significant programming flexibility in object layout and PLC controls, allowing
you to create the program needed to realize your operator interface vision.
•
•
•
•
•
•
•
•
•
•
•
•
•
High-Speed NT Link
High-speed NT Link highlights the advantages that come when you
partner an Omron PLC with an Omron touch screen. Combine
Omron’s CS1-EV1 PLCs with NT21/31/631 to benefit from 115k baud
serial communications tailored exclusively for PLC to touch screen
data. It is almost twice as fast as Host Link and 25% faster than
standard NT Link when a single NT unit is connected to a PLC serial
port. High-speed NT Link is three times faster than standard NT Link
with 8 NT units connected to a single CS1 or CJ1 serial port.
High-Speed NT Link - This 115 kbaud serial Omron
protocol allows rapid data exchange with Omron CJ1
and CS1 PLCs.
NT Link 1:N - At 38.4 and 115 kbaud, NT Link 1:N allows
8 screens to be connected to a single serial port on CJ1
and CS1 PLCs with minimal impact to performance.
PLC Programming Console - Simulate a hand-held
programming device right on the HMI screen and
monitor, set PLC values, and make minor ladder
program changes.
PLC Device Monitor - This function allows the NT31 and
NT631 to function as watch windows, where the user can
specify and view banks of PLC addresses, change values,
and view errors without opening the panel.
Pop-Up Windows - Present up to two pop-up windows
at a time on the HMI screen to control critical information
in a timely manner.
Window Control Area - Control pop-up windows from the
PLC memory by manipulating the window control area.
Parent/Child Windows - Create screen segments that can
be used again and again throughout a project. This
conserves both screen memory and programming effort.
Same programming functionality available in 5.2”, 5.7”,
10.4”, and 11.3” screen sizes.
DeviceNet communication module available for NT31
and NT631.
Supports multi-vendor communication, allowing Omron
touch screens to be the standard HMI.
Memory module can be set to automatically upload or
download both screen data and system firmware.
Analog data can be displayed in chart, bar graph, and
needle gauge objects.
Binary status can be shown with lamps, animated
bitmaps, and alarm bits.
High Function Touch Screens - NT21 / NT31 / NT631
Multi-Vendor Communications
Standardize on Omron’s high quality touch screens regardless of
which PLC vendors you use. Our drivers and vendor-specific
cables allow Omron’s NT31 and NT631 touch screens to
communicate with the PLCs from the following vendors:
• Omron (CV, CS1, CJ1, CPM1A, CPM2 , SRM1)
• Allen-Bradley (ML1000/1200/1500, SLC 5/00, 5/01, 5/02,
• GE Fanuc Series 90-20 and 90-30 PLCs
• Mitsubishi A and FX series PLCs
• Siemens S7-300 and S7-400 PLCs
• Modicon Micro, Premium, Quantum, Momentum
5/03, 5/04, 5/05)
OMRON Data Comparison
High-speed
High-speed
Relative Response Speed for Communications with
Single PT Connected
Relative Response Speed for Communications with
Eight PTs Connected
Host Link
All data was measured at the RS-232C port of the CPU Unit with
the response speed for a single NT Unit connected taken as 1.
NT Link
NT Link
NT Link
NT Link
0.0
0.0
0.5
0.5
1.0
1.0
1.5
1.5
2.0
2.0
Three times
faster
2.5 3.0
2.5 3.0