H5BR-B-AC100-240 Omron, H5BR-B-AC100-240 Datasheet - Page 9

• Manufacturer Part Number: H5BR-B-AC100-240
• Description: TIMER DIGITAL LCD
• Manufacturer: Omron
• Series: H5BRr

Specifications of H5BR-B-AC100-240

• Relay Type: Integrated
• Function: Programmable (Multi-Function)
• Circuit: SPDT (1 Form C)
• Delay Time: 0.001 Sec ~ 9999 Hrs
• Output Type: Mechanical Relay
• Contact Rating @ Voltage: 5A @ 250VAC
• Voltage - Supply: 100 ~ 240VAC
• Mounting Type: Panel Mount
• Termination Style: Screw Terminal
• Timing Adjustment Method: Up/Down Digit Keys
• Timing Initiate Method: Input Voltage
• Lead Free Status / Rohs Status: Supplier Unconfirmed

H5BR
The following table shows the timer settings when it is shipped. Change the settings as necessary to suit the system before
operation. Settings and the display receive power from the internal battery and are, therefore, unaffected by external power
interruptions. With the initial settings, there will be no output even if the power supply is connected. External inputs and outputs
cannot be used without a power supply.
Counting the Number of Bottles Filled
Model
Time range
Present value
Presets
Batch present count
Batch preset
UP/DOWN mode
Output mode
Output time
Input signal time
Key protect level
Inputs
Outputs
Key name
Increment keys (1-4)
Display key
Batch key
Mode key
Reset key
KEY OPERATIONS
FACTORY SETTINGS
INPUT/OUTPUT FUNCTIONS
BATCH COUNTER APPLICATION
Fill time = 3.5 seconds
Batch preset = 500
Start signal
Reset
Gate
Batch count reset
Key protect
Control output (OUT)
Batch output
H5BR-B (Standard)
- -.- -s
0.00 s
0.00 s
0
0
UP
A: Signal ON-delay (1)
Hold
20 ms
KP-1
Operation
Used to change the corresponding digit of the set value. Used to change data in the set mode.
Switches to the present value display.
Switches to the batch display.
Switches from run mode to set mode. Changes items in the set mode.
Resets timing and outputs.
Stops timing in A-2 and A-3 (power ON-delay) modes. Starts timing in other modes.
Resets present value (to zero in UP mode, to preset in DOWN mode).
Control inputs are not accepted while reset input is ON.
Reset indicator lit while reset input is ON.
Inhibits timer operation.
Resets batch count to zero and batch output turns OFF on leading edge.
Batch count signals are not accepted while batch count reset is ON.
Makes keys inoperative according to key protect level; four levels available.
Key protected indicator lit while key protect input is ON.
Effective when protect terminals are shorted.
Effective if power supply is turned off.
Outputs made according to designated output mode when corresponding preset is reached.
Outputs made when batch count equals the preset number of batches.
Batch output remains ON until batch count reset goes ON.
When the number of batches is set to zero, batch counting is performed, but batch outputs
are not made.
DISPLAY
9
BATCH
H5BR