BTEP-F570VGA-C-TP BATRON, BTEP-F570VGA-C-TP Datasheet

Page 1

... Specification Batron easyPanel Pro 5.7 Full version (5.7F) Version 1 - July 2008 Data Modul AG - www.data-modul.com ...

Page 2

... Batron Solutions easyPanel Pro5.7F (full version) The easyPanel Pro5. complete display-solution, including an ARM9 based single board computer, a touch screen and a aluminum casing, ready to be integrated in nearly any industrial or medical solution. All versions of the easyPanel Pro series come with 2xRS232, SD-Card slot and USB host and device interfaces ...

Page 3

Chapter Index A ) Specification easyPanel Pro 5.7 (Drawing/Connectors) ........................... Specification TCG057VG1AC-G00 ......................................................... Specification for NetDCU8 .................................................................... Specification for Touch Panel AST057................................................... Specification for Inverter PS8m053167F............................................... 65 Data ...

Page 4

A ) Specification easyPanel Pro 5.7 (Drawing/Connectors) Data Modul AG - www.data-modul.com 4 ...

Page 5

Baseboard: Data Modul AG - www.data-modul.com 5 ...

Page 6

Mounting Plate: Data Modul AG - www.data-modul.com 6 ...

Page 7

Back Cover: Data Modul AG - www.data-modul.com 7 ...

Page 8

Connectors: Front Data Modul AG - www.data-modul.com 8 ...

Page 9

Connectors: Back SD-Card Slot:Top Data Modul AG - www.data-modul.com 9 ...

Page 10

Absolute Maximum Ratings Supply Voltage 9-36V(DC) Power Consumption 10W (max) Operating Temperature 0...70 oC Storage Temperature -20...70 oC Weight 615g Data Modul AG - www.data-modul.com 69 ...

Page 11

B ) Specification TCG057VG1AC-G00 1. Application....................................................................................... 11 2. Construction and Outline.................................................................. 11 3. Mechanical Specifications................................................................ 12 4. Absolute Maximum Ratings .............................................................. 12 5. Electrical Characteristics .................................................................. 14 6. Optical Characteristics ..................................................................... 15 7. Interface Signals .............................................................................. 17 8. Timing Characteristics ...

Page 12

Application This data sheet defines the specification for a (640×R.G.B)×480 dot, amorphous silicon TFT transmissive color dot matrix type Liquid Crystal Display with CFL backlight. 『RoHS Compliant』 ２. Construction and Outline (640×R.G.B)×480 dots, COG type LCD with CFL backlight. ...

Page 13

Mechanical Specifications ITEM Outline dimensions Effective viewing area Dot number Dot pitch Display mode *1 Mass *1 Due to the characteristics of the LCD material, the color vary with environmental temperature. ４. Absolute Maximum Ratings 4-1. Electrical absolute maximum ...

Page 14

Environmental absolute maximum ratings ITEM Operating temperature *1 Storage temperature *2 Operating humidity *3 Storage humidity *3 Vibration Shock *1 Operating temperature means a temperature which operation shall be guaranteed. Since display performance is evaluated at 25℃, another temperature ...

Page 15

Electrical Characteristics ITEM Power input voltage *1 Current consumption *2 Permissive input ripple voltage(VDD=3.3V) Input signal voltage (Low) Input signal voltage (High) *1 VDD-turn-on conditions 3.0V 3.0V 0.3V 0. Power consumption Black & White ...

Page 16

Characteristics ITEM SYMBOL Response Rise time Down Viewing angle range Contrast ratio Brightness Red Green Chromaticity coordinates Blue White 6-1. Contrast ratio is defined as follows: Brightness at all pixels "White" Brightness at all pixels "Black" Measuring ...

Page 17

Definition of viewing angle φ＝0° ( θ direction ) 6-3. Measuring points 160×3 1 120 ○ 240 2 360 ○ (dot) 1) Rating is defined as the average brightness inside the viewing area minutes after CFL is ...

Page 18

Interface signals 7-1. LCD PIN NO. SYMBOL 1 GND GND 2 CK Clock signal for sampling each data signal Hsync Horizontal synchronous signal (negative Vsync Vertical synchronous signal (negative) GND GND RED data signal ...

Page 19

Timing Characteristics of input signals ８ 8-1. Timing characteristics ITEM Frequency Clock Duty ratio Set up time Data Hold time Horizontal sync. Cycle signal Pulse width Vertical sync. Cycle signal Pulse width Horizontal display period Hsync.-Clock phase difference Hsync.-Vsync. ...

Page 20

Input Data Signals and Display position on the screen D1,DH1 D1,DH1 D2,DH1 D2,DH1 D3,DH1 D3,DH1 D1,DH２ D1,DH２ D2,DH2 D2,DH2 D3,DH2 D3,DH2 D1,DH480 D2,DH480 D3,DH480 D1,DH480 D2,DH480 D3,DH480 8-5. Input Timing Characteristics THp Horizontal sync. 0.7VDD 0.7VDD Signal (Hsync) 0.3VDD ...

Page 21

Backlight Characteristics ITEM Starting discharge Voltage *1 Discharging tube current *2 Discharging tube voltage Operating life *3 Operating frequency *4 The Non-load output voltage (VS) of the inverter should be 1.3 times the maximum VS at the *1 low ...

Page 22

Number Identification The lot number shall be indicated on the back of the backlight case of each LCD. ＴＣＧ０５７ＶＧ１ＡＣ－Ｇ００ － □ □－□ □ － □ ＭＡＤＥ ＩＮ □□□□□ YEAR 2006 CODE ６ MONTH JAN. CODE １ MONTH JUL. CODE ...

Page 23

Installation of the LCD 1. The LCD's bezel must be grounded. The heat sink and shield cover are connected at the ground hole. The ground hole is located on the right side of the LCD when ...

Page 24

Caution items when handling the LCD NOT store in a high humidity environment for extended periods. Image degradation, bubbles, and/or peeling off of polarizer may result. 2. The front polarizer is easily scratched or damaged. Prevent touching ...

Page 25

Data / Environmental Test TEST TEST ITEM CONDITION High Temp. (80℃) Atmosphere Low Temp. (-30℃) Atmosphere High Temp. (40℃) Humidity (90%RH) Atmosphere Temp. Cycle (-30℃ 0.5 h) (R.T. 0.5 h) (80℃ 0.5 h) High Temp. (70℃) Operation Vop * ...

Page 26

Data Modul AG - www.data-modul.com 25 ...

Page 27

Inspection Standard Note General 1. Customer identified anomalies not defined within this inspection standard shall be reviewed by Kyocera, and an additional standard shall be determined by mutual consent. 2. Inspection Conditions Luminance Inspection distance Temperature Direction Definition of ...

Page 28

Standard Classification Inspection item defect Dot Bright dot defect (in LCD defect glass) Black dot defect 2 dots join 3 or more dots join Total dot defects Others White dot, Dark dot (Circle) External Polarizer(Scratches) inspection (Defect on Polarizer ...

Page 29

C ) Specification for NetDCU8 1. Arrangement of Connectors .............................................................. 29 2. Connectors....................................................................................... 29 2.1. Counting of the connector pins ................................................. 29 2.2. J1 Power Supply........................................................................ 30 2.3. J2 Ethernet Interface ................................................................. 30 2.4. J2 Serial RS232 Port 1............................................................... 31 ...

Page 30

Arrangement of Connectors Figure 1.1: Top View 1 Typ NetDCU8 1** - Typ DCUL3(C) 2 Connectors 2.1 Counting of the connector pins All connections prepared for two-row connectors on the ...

Page 31

J1 Power Supply J1 Power Supply Pin Function 1 +3V … +15V / max (CFL- Converter) 2 +5V ± max. 0,6A (*) 3 +3V...+3,6V DC (Battery buffering RTC) (**) 4 GND (Ground Power Supply) ð ...

Page 32

J2 Serial RS232 Port 1 J2 serial RS232 port 1 Pin Signal Function RxD1 Received Data 4 RTS1 Request To Send 5 TxD1 Transmitted Data 6 CTS1 Clear To Send ...

Page 33

J2 CAN Interface J2 CAN Interface Pin Signal Function ...

Page 34

Example CAN-Interface type 1 The following schematic shows the needed interface between NetDCU8 and CAN bus. It has no galvanic isolation. 2.5.2 Example CAN-Interface type 2 The following schematic shows the needed interface between NetDCU8 and CAN bus. It ...

Page 35

J3 Display Interface J3 Display Interface Pin Signal Function 1 GND Signal Ground 2 R1 Red Bit Red Bit 0 (LSB Green Bit 5 (MSB Green Bit Green Bit ...

Page 36

J3 Display Interface Pin Signal Function 21 M Display data valid signal 22 LIP Line Impulse 23 DEN Display ON 24 GND Signal Ground 25 V Power supply LCD LCD +5V (+3,3V Negative LCD Voltage ...

Page 37

J4 FS-Bus (8 bit Extension interface) J4 parallel extension interface Pin Signal Function 1 D0 Data Bit D0, I/O (*) 2 D1 Data Bit D1, I/O (*) 3 D2 Data Bit D2, I/O (*) 4 D3 Data Bit D3, ...

Page 38

FS-Bus Timing Read Cycle ADE CWC AH *CS t CPH ADS t ADH ADDR Item Symbol ADE set up time t AS ADE hold time ...

Page 39

J5 Matrix Keyboard J5 Matrix Keyboard Pin Signal Function GPIO7 Row 7 – Matrix key 3 GPIO6 Row 6 - Matrix key 4 GPIO5 Row 5 - Matrix key 5 GPIO4 Row 4 - ...

Page 40

Matrix Keyboard example connection The following schematic show the connection of a keyboard with a 8x8 matrix and four static keys. Data Modul AG - www.data-modul.com 39 ...

Page 41

J5 I/O interface J5 I/O Interface Pin Signal Function 1 GPIO8 Interrupt 2 GPIO7 IO-Port 7 3 GPIO6 IO-Port 6 4 GPIO5 IO-Port 5 5 GPIO4 IO-Port 4 6 GPIO3 IO-Port 3 7 GPIO2 IO-Port 2 8 GPIO1 IO-Port ...

Page 42

J5 serial RS232 port 2 J5 serial RS232 Interface Pin Signal Function RxD2 Received Data TxD2 Transmitted Data ...

Page 43

J7 serial RS232 port 3 J7 serial RS232 Interface Pin Signal Function RxD3 Received Data 10 TxD3 Transmitted Data . - - - ...

Page 44

J7 Touchpanel Interface J7 Touchpanel Interface Pin Signal + GND Signal Ground 15 TOUCH X+ X- Voltage Measurement 16 ...

Page 45

J7 USB Interface 1 J7 USB Interface 1 Pin Signal Function + GND Signal Ground . - - - . . . ...

Page 46

J7 USB Interface 2 J7 USB Interface 2 Pin Signal Function + GND Signal Ground . - - - . . . . 19 ...

Page 47

Example USB Interface (Host/Device) The following schematic shows the usage of the USB host or device interface. Data Modul AG - www.data-modul.com 46 ...

Page 48

J7 Analog Input J7 analog Input Pin Signal Function AD2 Analog Input 2 (*) / altern. RxD3 10 AD3 Analog Input 3 (*) / altern. TxD3 ...

Page 49

Status Indicators The NetDCU8 comprises three LED status indicators. They are located on the top side of the board in the bottom right corner Figure 3.1: Status LED The following status information is displayed: Status LED LED Signal 1 ...

Page 50

Configuration NetDCU8 By hardware-configuration of NetDCU8 some settings for pe- ripheral devices could be done. Figure 4.1: Top View R16 R15 R14 R13 Figure 4.2: Bottom View Data Modul AG - www.data-modul.com R33 R34 R17 R22 R21 R20 RN22 ...

Page 51

Configuration Display Interface Power supply for the display and display type are configured with jumpers Configuration LCD Power Supply +5V (*) LCD Power Supply +3,3V CSTN-LCD (Passiv LCD) TFT-LCD (*) Meaning: (*) Default Setting Rxx Jumper, 0 Passive LCDs ...

Page 52

Configuration parallel System Interface High- Level of parallel Port (J4) could set by the Jumper R33, R44 respective 3,3V. Configuration 5V I/O Parallel Interface 3.3V I/O Parallel Interface (*) Meaning: (*) Default Setting Rxx Jumper, 0 ...

Page 53

Dimensions NetDCU8 Board thickness: Height of parts on top side: Height on parts on bottom side: Pin grid of connectors Figure 5.1: Top View All values can have tolerances of ±0.5mm. Data Modul AG - www.data-modul.com 1,5 mm 6.0 ...

Page 54

Technical Data NetDCU8 Power Supply: +5V DC Current Consumption: <0.5A (excluding Display) Touch-Screen: 4 wire, analog resistive Keyboard matrix keyboard alternative Digital-I/O Inputs/Outputs: max. 21 I/O ports alternative matrix keyboard 8 bit FS-Bus (hw extension bus) ...

Page 55

D ) Specification for Touch Panel AST057 1. Outline Drawing ............................................................................... 55 2. Product Specifications...................................................................... 56 3. Testing Regulation............................................................................ 58 4. Reliability Condition ......................................................................... 60 5. Recommended Connector ................................................................ 60 6. Handling Notes ................................................................................ 61 7. Revision History ............................................................................... 63 ...

Page 56

Data Modul AG - www.data-modul.com 55 ...

Page 57

Product Specifications 2-1. Product Applicable § This specification is applied to the analog resistive touchscreen: ATP/AST Series. 2 -2. Structure § Dimensions, structure, and shape are referred on the drawing attached. 2-3. Environmental Specifications Specification Operating Temperature Operating Humidity ...

Page 58

Appearance § Scratch, dust (W = width length average diameter = (longest + shortest) /2) Item Width (mm) 0.1≥W>0.05 Scratch 0.05≥W>0.03 0.03≥W 0.1≥W>0.05 Dust (Linear) 0.05≥W 0.4≥D>0.3 *1 Dust 0.3≥D>0.2 (Circular) 0.2≥D Applied only in ...

Page 59

Testing Regulation 3-1. Testing Regulation § If the regulation is not specified, the test is performed under the supplier’s regulation. § Tests are performed under the room temperature unless specified. The room temperature is referred as follows: Temperature: 20°C±5°C ...

Page 60

Electrical Characteristics § Terminal Resistance Test Condition: Top and bottom electrodes are measured at the terminal. Judgement: Must satisfy the specification. § Insulation Resistance Test Neighboring Terminals: Measured by applying the reference voltage to the terminals Active Area Electrodes: ...

Page 61

Reliability Condition 4-1. Temperature Condition § Temperature Condition Test Following test are performed in the condition with no dew condensation: Cold Test: Tested after leaving the parts in -30°C±3°C for 240 hours and in the room temperature for 2 ...

Page 62

Handling Notes 6-1. Precautions § This product is intended for use in standard applications (computers, office automation, and other office equipment, industrial, communications, and measurement equipment, personal and household devices, etc.) Please avoid using this product for special applications ...

Page 63

Mounting Notes § Bezel Edge Bezel edge must be positioned in the area between the Active Area and the Viewing Area. The bezel may press the touchscreen and cause input if the edge enters the Active Area. § Gap ...

Page 64

Revision history Rev1 (April 15, 1998) Initial release Rev2 (June 1, 1999) The overall revision by specification review. Rev3 (April 1, 2002) The address in the office was changed by the move. Rev4 (August 16, 2002) 1-4.Activation Force is ...

Page 65

Rev10 (November 10, 2006) The specification item name was changed. 1-3.”Storing Temperature” to “Storage Temperature” 1-3.”Storing Humidity” to “Storage Humidity” 1-4.”Operating Load” to “Activation Force” 1-4.”Light Transmissivity” to “Light Transmittance” 1-4.”Top Surface Hardness” to “Surface Hardness” 2-3.”Operating Load Test” to ...

Page 66

E ) Specification for Inverter PS8m053167F Data Modul AG - www.data-modul.com 65 ...

Page 67

Specifications and Applications Information 12/30/05 The ERG 8m053167F (8m Class) (8m Class) low profile dc (8m Class) (8m Class) (8m Class inverter is specifically designed to power the Kyocera TCG057QV1AA-G00 LCD display module to a moderate brightness level ...

Page 68

...

Page 69

LCD and display driver * value should be low enough to maintain minimum lamp current at minimum brightness Vmin* to +Vin * Vmin should be high enough U ...

Page 70

Data Modul Headquarters Munich Landsberger-Str. 322 D-80687 Munich - Germany Tel.: +49-89-56017-0 Sales Office Duesseldorf Fritz-Vomfelde-Str. 8 D-40547 Duesseldorf - Germany Tel.: +49-211-52709-0 Sales Office Hamburg Borsteler Chaussee 51 D-22453 Hamburg - Germany Tel.: +49-40-42947377 - 0 Sales Office Stuttgart ...