ECO18B TIMEGUARD, ECO18B Datasheet - Page 4

• Manufacturer Part Number: ECO18B
• Description: BULKHEAD LIGHT, ENERGY SAVER, 18W
• Manufacturer: TIMEGUARD

Specifications of ECO18B

• Length: 240mm
• Depth: 112mm
• Base Type: ES
• External Depth: 112mm
• External Length / Height: 240mm
• External Width: 117mm
• Ip/nema Rating: IP44
• Power Rating: 18W
• Supply Voltage: 230V
• Svhc: No SVHC (15-Dec-2010)
• Lamp Base Type: ES
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Remove the bulb from its packaging and fit into the lampholder. ensure the bulb is fully secured
into the lampholder. See diagram C.
pierce and pass the cable through the grommet into the unit. see diagram C.
It is recommended that the grommet is pierced with a screwdriver to ensure a better seal.
Remove the cable clamp, feed the incoming cable under the cable clamp and secure. Do not
overtighten the cable clamp as it could damage the cable insulation.
CONNECTION
Connect the cable to the terminal block on the unit as follows:
neUTRAl (Blue)
n
eARTH (Green/Yellow)
lIVe (Brown)
l
ensure Connections are secure.
ensure any extra cable is tucked into the space in the wiring box.
Replace the front cover and secure using the two fixing screws as diagram A
Installation is complete!
The integral dusk sensor will automatically turn on the unit at the same level of darkness each
night, and turn it off during the same level of daylight each morning.