AFCT-57V6USZ Avago Technologies US Inc., AFCT-57V6USZ Datasheet - Page 22

• Manufacturer Part Number: AFCT-57V6USZ
• Description: Fiber Optic Transceiver,MODULE
• Manufacturer: Avago Technologies US Inc.

Specifications of AFCT-57V6USZ

• Data Rate: 1.25Gbd
• Wavelength: 1550nm
• Applications: Ethernet
• Voltage - Supply: 2.97 V ~ 3.63 V
• Connector Type: LC Duplex
• Mounting Type: SFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Connectors and Cables
The optical interface of the AFCT-57V6USZ is a duplex LC
connector which is described in TIA/EIA FOCIS document
[5]. PC-polished ferrules are recommended in mating
cables for the AFCT-57V6USZ.
The electrical connection is provided by a card edge
connector which mates with a corresponding socket [1].
In addition the transceiver fits a cage assembly [1] which
also functions as an EMI shield. Contact an Avago sales
office for cable, electrical connector, cage and accessory
ordering information.
Physical Description
Figure 14 shows the mechanical outline of the Avago
AFCT-57V6USZ SFP. For a complete description of the
footprint standards, refer to the MSA specification [1].
Laser Eye Safety
The Avago AFCT-57V6USZ module is a Class 1 la-
ser product under the requirements of IEC 60825-
1:1993+A1:1997+A2:2001 and U. S. 21 CFR 1040.10 and
1040.11 except for deviations pursuant to Laser Notice
No. 50, dated July 26, 2001, when used as specified by
Avago. Class 1 products are considered to be safe.
Caution -Use of controls or adjustment or performance
of procedures other than those specified herein may
result in hazardous radiation exposure. Any modifica-
tion, adjustment, or use of the AFCT-57V6USZ module
not specified by Avago may void the certification of the
product and constitute an act of new manufacturing of
a laser product under 21 CFR Subchapter J, and as such
will require recertification by the new manufacturer. This
includes operation beyond the Absolute Maximum Rat-
ings listed in Table 2.
For product information and a complete list of distributors, please go to our web site:
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2009 Avago Technologies. All rights reserved.
AV02-0056EN - March 25, 2009
www.avagotech.com
Regulatory Information
This product is under testing with respect to American
and European product safety and electromagnetic com-
patibility regulations. For further information regarding
regulatory certification, refer to the SFP Regulatory Speci-
fication [7] and SFP Application Note [6], or contact the
Avago sales office.
References
[1] Small Form-factor Pluggable (SFP) Transceiver Multi
[2] IEEE 802.3z Media Access Control (MAC) Parameters,
[3] SFF-8472, Digital Diagnostic Monitoring Interface
[4] A. Widmer & P. Franaszek, “A DC-balanced, partitioned-
[5] TIA/EIA-604-10, “FOCIS 10, Fiber Optic Connector In-
Source Agreement, September 14, 2000
Physical Layer, Repeater and Management Parameters
for 1000Mb/s Operation.
for Optical Transceivers, Draft Revision 9.3, August 1,
2002
block, 8B/10B transmission code “IBM Journal of
Research & Development”, Vol. 27, No. 5, Pg. 440-451,
(Sept. 1983).
termateability Standard”, 1999