8800 3M, 8800 Datasheet - Page 103

• Manufacturer Part Number: 8800
• Description: Static Dissipative Rubber Table Mat
• Manufacturer: 3M

Specifications of 8800

• Ground Terminals: Stud
• External Width: 2ft
• Thickness: 1.7mm
• Roll Length: 40ft
• Color: Gray
• Lead Free Status / RoHS Status: na

98
Test Equipment
3M
Plate Monitor
The 3M Charge Analyzer 711 was designed to test the performance
of products used for the purpose of static control and elimination.
The Charge Analyzer 711 can be used as a laboratory analytical tool,
evaluating the performance of ionizing equipment, static-protective
packaging, work surfaces, and personnel grounding systems. It is very
effective for use as a demonstration tool in employee static awareness
training sessions.
The lightweight and compact construction of the unit offers versatility in
the workplace. The modular internal construction simplifies modifications
and repair by exchange of the functional printed circuit boards. All
parameter settings are controlled via a built-in EEPROM. Periodic
calibrations can be performed without the need to open the chassis.
When the analyzer is switched off, all last set parameters are stored
in the EEPROM. These parameters are defaulted to when the unit is
switched on again. The analyzer 711 is powered by built-in rechargeable
NiMH-batteries or an AC wall plug-in adapter. All interfacing connections
are made at the rear of the unit.
3M
For more product information, please visit www.3M.com/static
™
Charge Analyzer 711
™
Charge Analyzer/Charge
Product No.
711
Description
The Charge Analyzer 711 is shipped in a durable
black case with foam interior, containing the
following accessories: (Certified only)
• Cup Electrode
• Plate Electrode
• Cylinder Electrode
• AC/DC Adapter, DC 12 V / 500 mA
• Sensor Cover
• Teflon
• Grounding Cord with Alligator Clip
• RS 232 Interface Cable
• 2 in. (50 mm) High Conductive Container
• Insulated Bulldog Clip
• Metal Spacers (3) with Thread, 3 in. length (76 mm)
• Software Disk for Data Acquisition
• Operating Instructions
• Transport Case
• Certificate of Conformity
• Sensor, 711 RS for Measuring Electrostatic
with Insulating Handle
Fields, with 6.5 ft. (2 m) Cord
™
Measuring Lead, 1 m
2002/95/EC
Compliant
RoHS