07501 Desco, 07501 Datasheet - Page 2

• Manufacturer Part Number: 07501
• Description: FOOT GROUNDER, SOLE, SMALL,2MEG
• Manufacturer: Desco
• Type: Premium Sole Grounderr

Specifications of 07501

• Grounder Type: Sole
• Color: White
• Resistance: 2Mohm
• Lead Length: 30"
• Fastening Type: Hook And Loop
• Approval Bodies: UL
• Rohs Compliant: NA
• Lead Free Status / Rohs Status: RoHS Compliant part

TB-2020 Page 2 of 2
2. Insert the ground-
ing tab inside of the
shoe and under the
foot. Make sure that
a solid contact is
made between the
sock and body. Cut
grounding tab to
desired length.
D-RING TOE GROUNDERS
Desco model 07595 toe grounders with the elastic
D-ring fastening system are designed for use on
heeled shoes. Desco toe grounders have a blue
lining that will prevent marring on white or light
colored shoes. These toe grounders include a
molded external 2 megohm resistor and a
permanently attached grounding tab.
1. Insert the grounding tab inside
of the shoe and under the foot.
Make sure that
a solid contact
is made
between the
sock and body.
Cut grounding
tab to desired
length.
3. Pull elastic strap around the
back of the heel. Adjust D-
ring plastic loop for a
comfortable fit.
4. Test each toe
grounder to confirm
proper installation.
SOLE GROUNDERS
Desco model 07501, 07502, and 07503 sole
grounders are designed for use on standard
shoes. Desco sole grounders are available in
three sizes and can be easily adjusted to fit the
individual wearer. Sole grounders have a lining
that prevents marring on white or light colored
shoes. Models 07507, 07508, and 07509 also
have a non-marring exterior to prevent marks on
floors. Sole grounders have a molded exterior 2
megohm resistor.
1. Place the sole grounder on the shoe so that the
3. Pull fabric strap through cam and
lock in place. This will secure toe
grounder firmly on shoe.
DESCO EAST - One Colgate Way, Canton, MA 02021-1407 • [phone] • Fax [phone] • Web Site: http://www.desco.com
4.Test each toe ground to
1. Place the toe grounder on
confirm proper installation.
2. Place rubber toe
material under toe area
of shoe sole. Pull velcro
strap over top of shoe
and cinch down until
snug. Install so that the
lined surface is making
contact with the shoe.
the shoe so that the
lining is making
contact with the
shoe.
DESCO WEST - 3651 Walnut Avenue, Chino, CA 91710 • [phone] • Fax [phone]
GROUNDING
TAB
GROUNDING
TAB
lining is making contact with
the shoe.
to desired length.
3. Pull the strap through the
D-rings and cinch down
for a snug, comfortable
fit.
4. Test each foot
grounder to confirm proper
installation.
FULL COVERAGE GROUNDERS
Desco model 17290, 17291, and 17292 full
coverage grounders are designed for use on
standard shoes. They can be easily adjusted to fit
the individual wearer. They have a lining that will
not marr most footwear. These foot grounders
have a discrete one megohm resistor built into the
grounding tab.
2. Insert the grounding
tab inside of the shoe
and under the foot. Make
sure that solid contact is
made between the
stockinged foot and
grounding tab. Cut
grounding tab to desired
length.
coverage grounder to confirm proper installation.
FULL COVERAGE NON-MARRING
GROUNDERS
1. Insert the conductive grounding tab inside the
shoe and under the foot.
2. Pull front and side extension tabs securing Full
Coverage Foot Grounder
around the periphery of
shoe positioning straps
near heel and ball of foot.
3. Then, tuck excess
conductive
grounding tab
and body. Cut grounding tab
is made between the sock
Insert the grounding tab
sure that a solid contact
inside of the shoe and
under the foot. Make
3. Connect the snap-
loc fastener together.
Adjust elastic strap for
behind itself.
comfortable fit. Tuck
excess elastic strap
4. Test each full
1. Place the full
coverage
grounder on the
shoe so that the
lining is making
contact with the
shoe.
2.
ATTENTION: This product is not recommended for use
on equipment with operating voltage exceeding 250
VAC.
CAUTION: The ESD Series is for electrostatic control. It
will not reduce or increase your risk of receiving electric
shock when using or working on electrical equipment.
Follow the same precautions you would use without
wrist straps, including:
• Make certain that equipment having a grounding
• Make certain that you are not in contact with
into the shoe.
4. Test each foot
grounder on an ESD
footwear tester to
confirm proper
installation.
DISPOSABLE FOOT
GROUNDERS
Limited Warranty
Desco expressly warrants that for a period of one (1)
year from the date of purchase, Desco foot grounders
will be free of defects in material (parts) and
workmanship (labor). Within the warranty period, the
product will be tested, repaired, or replaced at
Desco’s option, free of charge. Call our Customer
Service Department at 909-627-8178 (Chino, CA) or
781- 821-8370 (Canton, MA) for a Return Material
Authorization (RMA) and proper shipping instructions
and address. Include a copy of your original packing
slip, invoice, or other proof of purchase date. Any unit
under warranty should be shipped prepaid to the
Desco factory. Warranty repairs will take
approximately two weeks.
If your unit is out of warranty call Customer Service at
909-627-8178 (Chino, CA) or 781-821-8370 (Canton,
MA) for a Return Material Authorization (RMA) and
proper shipping instructions and address. Ship your
unit freight prepaid. Desco will quote repair charges
necessary to bring your unit up to factory standards.
Warranty Exclusions
THE FOREGOING EXPRESS WARRANTY IS
MADE IN LIEU OF ALL OTHER PRODUCT
WARRANTIES, EXPRESSED AND IMPLIED,
INCLUDING MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE WHICH ARE
SPECIFICALLY DISCLAIMED. The express
warranty will not apply to defects or damage due to
accidents, neglect, misuse, alterations, operator error,
or failure to properly maintain, clean or repair
products.
Limit of Liability
In no event will Desco or any seller be responsible or
liable for any injury, loss or damage, direct or
consequential, arising out of the use of or the inability
to use the product. Before using, users shall
determine the suitability of the product for their
intended use, and users assume all risk and liability
whatsoever in connection therewith.
type plug is properly grounded.
grounded objects other than through the ESD Series.
© 2008 DESCO INDUSTRIES INC.
Employee Owned