APGDT001 Microchip Technology, APGDT001 Datasheet - Page 22

• Manufacturer Part Number: APGDT001
• Description: LIN Serial Analyzer
• Manufacturer: Microchip Technology
• Series: -r

Specifications of APGDT001

• Silicon Manufacturer: Microchip
• Application Sub Type: Serial Analyzer
• Kit Application Type: Communication & Networking
• Features: Used To Send Messages, Monitor Bus Traffic, Perform Errors Checks, Filter Messages
• Kit Contents: Board
• Tool Type: LIN Serial Analyzer
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: PC to LIN Communications

LIN Serial Analyzer User’s Guide Rev2.0
DS51675B-page 18
3.5.3
The Slave Response setup function specifies message frames that are published to the
bus whenever the correct ID is recognized.
FIGURE 3-6:
To display the dialog box, select Setup>Slave Response.
3.5.4
The “Slave Response Frames” field is composed of 0 to n rows of one or more mes-
sages that are sent over the bus in response to a valid ID byte. These messages can
be entered manually, loaded from a previously saved session, or both.
When the response is sent, it is displayed in the Transaction window if it is open and
active.
Messages in the “Slave Response Frames” field can also be saved for reuse (see
Section 3.4.2 “Save” and Section 3.4.3 “Save As”).
3.5.4.1
Messages must consist of the ID byte without parity bits and the data bytes, all
separated by spaces. All inputs are in hexadecimal radix.
The checksum is not included; it is calculated at send time unless the “forced” Check-
sum option is selected.
Comments or notes may be attached to each frame by prefacing it with a
semi-colon (;). Any text after the semi-colon will be disregarded and not transmitted. All
notes will be saved in the selected .ini file and reloaded when reopened.
Slave Response
Slave Response Frames Field
RESPONSE SYNTAX
SLAVE RESPONSE SETUP WINDOW
© 2008 Microchip Technology Inc.