AT91SAM3U-SK EMBEST, AT91SAM3U-SK Datasheet - Page 3

• Manufacturer Part Number: AT91SAM3U-SK
• Description: ATMEL AT91SAM3U Starter Kit
• Manufacturer: EMBEST

Specifications of AT91SAM3U-SK

• Silicon Manufacturer: Atmel
• Core Architecture: ARM
• Core Sub-architecture: Cortex-M3
• Features: RS-232 Serial Cable, 2.4" TFT LCD Panel, JTAG20-14-8 Convert Module
• Silicon Core Number: AT91S
• Silicon Family Name: AT91SAM3xxx

1.2 Hardware Requirements
In order to use this AT91SAM3U Starter Kit, we recommend you to prepare the following
hardware devices:
(1) One AT91SAM3U ARM CORTEX-M3 Board.
(2) A PC with the following resources:
(3) One USB-JTAG Emulator.
(4) Two USB cables.
(5) One double Female Serial Cable
1.3 Software Requirements
To use the AT91SAM3U starter kit, we recommend you to install the following software
tools:
(1) Windows Operating System
The Keil µVision tool chain runs in these Windows Operating Systems:
(2) Tools and Examples
To compile, link, and run applications on the AT91SAM3U Evaluation Board, please install
the following products on your pc:
1.4 Power Supply
1.5 Connection
The AT91SAM3U ARM Cortex-M3 board supports two power supply modes:
(1) Supply 5V DC through power jack on the board.
(2) Supply power through USB connecter on the board, the current should be less than
500mA.
To use the AT91SAM3U Starter Kit, you must:
Two unused USB ports—one is for power supply r of the board and the other for
connecting to the JTAG Emulator to download and debug programs.
An unused RS-232 COM port for Flash In-System Programming (ISP) via the Serial
Interface.
Microsoft Windows 2000
Microsoft Windows XP
Keil RealView MDK IDE
The Keil RealView MDK IDE is a commercial software tool, if you don't have this IDE ion
your PC, you can purchase the authorized edition from Keil Corporation, or download
the evaluation version of RealView MDK (32KB limited) for free of charge. Of course, you
can use other IDE as well, such as IAR EWARM, but we suggest you using Keil RealView
MDK IDE, then you can use the example projects provided in the CD-ROM of the kit.
Example projects written for this AT91SAM3U Starter Kit. These example programs are
stored in the CD-ROM accompanied with the kit.
Connect the JTAG connector of Emlink for ARM to the JTAG connector of the
AT91SAM3U ARM Cortex-M3 board.
Connect the USB connector of Emlink for ARM to the USB connector of the PC.
Connect power to the board using a standard USB A/B cable.
www.embedinfo.com/en
3/3