MB2146-410A-01-E Fujitsu, MB2146-410A-01-E Datasheet - Page 20

• Manufacturer Part Number: MB2146-410A-01-E
• Description: KIT, STARTER, MB95200/210/220
• Manufacturer: Fujitsu
• Type: Starterr

Specifications of MB2146-410A-01-E

• Kit Features: USB Communication Port, Connect To Target System Via User Interface Connector, Tracking Function
• Mcu Supported Families: F2MC-8FX
• Tool / Board Applications: Microcontroller
• Silicon Manufacturer: Fujitsu
• Silicon Family Name: F2MC-8FX
• Kit Contents: Board
• Features: USB Interface To PC/SOFTUNE, Compatible To USB Protocol Version 1.1
• Rohs Compliant: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

4. Sample Code Manual
4.1 Topic List
16
The following sample codes are provided with MB95200H/210H MCU Starter Kit,
• IO_LED project
• A/D_Potentiometer project
• Timer_Buzzer project (Continuous timer)
• ExInt_Key Project
• UART project
• SIO project
• LIN slave
• LIN master
In this example, the 3 LEDs will be on in the following sequence:
...->LED2->LED3->LED4...
In this example, the 3 LEDs will display “on” or “off” according to the arrow direction of VR3.
In this example, Buzzer will be on once by pressing Key S1; Buzzer will be on twice by press-
Press Key S1, the 3 LEDs will be on in the following sequence:
...->LED4->LED3->LED2...
Press Key S2, the 3 LEDs will be on in the following sequence:
...->LED2->LED3->LED4...
In this example, the MCU works in an asynchronous mode.
(9,600bps, 1 stop bit, no parity)
After a reset, the MCU will send "Welcome to the LIN-UART (asynchronous mode) of
Then the MCU feedbacks any bytes it received.
This example uses two EV-boards to demonstrate the SIO (synchronous mode) function.
One MCU keeps sending data while the other keeps receiving. One LED is toggled to indicate
In this example, the MCU is running in a Lin Slave mode. After a reset, the MCU is waiting
In this example, the MCU is running in a Lin Master mode. After a reset, the MCU starts send-
ing Key S2.
MB95200series (8FX)" to RS232 transceiver.
(9600bps)
the communication is correct.
for data from the Master. If the data is received correct, LED4 starts twinkling.
ing data to a Slave. If the Master gets correct data from the Slave, the MCU restarts sending.
While sending data to the Slave, LED2 keeps twinkling.