DM163035+TEFLCST3 Microchip Technology, DM163035+TEFLCST3 Datasheet - Page 28

• Manufacturer Part Number: DM163035+TEFLCST3
• Description: KIT, PICDEMLAB+FLOWCODE-HOME BUNDLE/
• Manufacturer: Microchip Technology

Specifications of DM163035+TEFLCST3

• Kit Contents: Component Kit, PICDEM Lab Development Board, PICkit 2 Programmer/ Debugger, CD Containing User Guide
• Svhc: No SVHC (15-Dec-2010)
• Development Tool Type: Hardware / Software - Dev
• Silicon Manufacturer: Microchip
• Core Architecture: PIC
• Core Sub-architecture: PIC10, PIC12, PIC16
• Silicon Core Number: PIC10F, PIC12F, PIC16F
• Silicon Family Name: PIC10F2xx, PIC12F6xx, PIC16F6xx
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PICDEM
DS41381A-page 24
TM
Each bit in the PORTC register should now be connected to one of the 8 LEDs of the
LEDs component. Click Done to close the window.
More information on the LEDs component and configuration can be found in the
Flowcode Software Help files.
The project is now ready to simulate.
15. In the Simulation Toolbar, click the Run button to run the simulation or click the
FIGURE 2-15:
Regardless of the simulation method used, the LEDs component in the workspace
should now light each LED as per the value loaded into the Output icon in Step 11.c,
as shown in Figure 2-16.
FIGURE 2-16:
microcontroller on the PICDEM Lab Development Board.
16. Connect the PICkit™ 2 Programmer/Debugger to an available USB port on the
17. To begin programming, press the Compile to Chip button
Lab Flowcode Companion Guide
In the next steps, the project will be compiled and then downloaded to the PIC16F690
Step Into button to step through each block in the flowchart sequentially
(Figure 2-15).
PC using the supplied cable, then to the J6 ICSP1 for the PIC16F690 connector
on the PICDEM Lab Development Board.
toolbar or select Chip>Compile to Chip... in the Flowcode workspace. The
Compiler window should now open and begin compiling the project to check for
any errors. Following a successful compilation, the programmer will launch
beginning the download process to the PIC16F690. The red Busy LED on the
PICkit 2 Programmer/Debugger will light briefly indicating that the PIC16F690 is
being programmed. Once completed, the Compiler Messages window should
indicate that the project compiled and was successfully downloaded to the
FLOWCODE SOFTWARE SIMULATION TOOLBAR
LEDS COMPONENT SIMULATION RESULT
© 2009 Microchip Technology Inc.
Step over
Step into
Stop
Pause
Run
in the compiler