USB-2-X V2 TRINAMIC, USB-2-X V2 Datasheet - Page 4

• Manufacturer Part Number: USB-2-X V2
• Description: USB TO SERIAL ADAPTOR
• Manufacturer: TRINAMIC
• Type: USB To Serial Adapterr

Specifications of USB-2-X V2

• Kit Features: Equipped With CAN, I2C, SIP And LIN Interfaces
• Development Tool Type: Hardware / Software - Adapter
• Tool / Board Application: USB To Serial Adapter
• Convert From: USB
• Convert To: Serial Adaptor
• Svhc: No SVHC (15-Dec-2010)
• Ic Adapter Type: USB To Serial Adapter
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

4
2 The USB2X Hardware
2.1 Overview
Figure 1 gives an overview of the USB2X devices and shows where which interfaces are located. Figure 2 shows
the PCB of the USB2X interface.
Figure 1: The USB2X device
2.2 Connectors
The pin assignments of the connectors of the USB2X device are as follows:
2.2.1 CAN
A CAN termination resistor of 120 ohms can be switched in by the jumper that is located under the USB socket.
RS485
Pin Signal
2
7
3
6
connector
IIC / LIN / SPI
connector
CAN_LOW
CAN_HI
GND
GND
GND
B
A
Figure 2: The PCB of the USB2X device
USB2X Interface Converter
Trinamic Motion Control GmbH & Co KG
D – 20357 Hamburg, Germany
Phone [phone] - 0
FAX: [phone] - 60
http://www.trinamic.com
Sternstraße 67
USB connector
CAN connector