90 3M, 90 Datasheet - Page 2

• Manufacturer Part Number: 90
• Description: ADHESIVE, 24FL.OZ
• Manufacturer: 3M

Specifications of 90

• Adhesive Type: Elastomer
• Adhesive Applications: Bonding - General Purpose
• Color: Clear
• Dispensing Method: Aerosol
• Weight: 141.6lb
• Volume: 24fl.oz. (US)

3M
Spray Adhesive
Typical Adhesive
Performance
Characteristics
™
Hi-Strength 90
Note: The following technical information and data should be considered representative
Peel Adhesion: Peel bonds of cotton duck (canvas) to the listed substrate were tested
at a peel angle of 180° at two inches per minute separation rate @ 75°F (24°C).
Peel Adhesion: T-Peel bonds were tested at two inches per minute separation rate.
Peel Adhesion at Temperature: T-Peel bonds of cotton duck (canvas) to itself were
tested at two inches per minute separation rate.
Overlap Shear Strength: Overlap shear strength on birch plywood to itself tested
and on maple to itself at two inches per minute separation rate @ 75°F (24°C).
FRP (Fiberglass Reinforced Plastic)
or typical only and should not be used for specification purposes.
HPL (High Pressure Laminate)
CRS (Cold Rolled Steel)
HPL / Particle Board
Test Temperature
Stainless Steel
Polycarbonate
Polypropylene
Polypropylene
120°F (49°C)
140°F (60°C)
160°F (71°C)
180°F (82°C)
-30°F (-34°C)
Polyethylene
Polyethylene
Substrate
Substrate
75°F (24°C)
Substrate
Aluminum
Aluminum
Nylon 6,6
Acrylic
Maple
Birch
PVC
ABS
- 2 -
Value - PSI (lbs. / square inch)
Value - PIW (lbs. / inch width)
Value - PIW (lbs. / inch width)
Value - PIW (lbs. / inch width)
20.5
19.6
20.6
22.8
25.2
24.4
16.6
14.8
25.6
13.5
17.5
16.5
13.4
13.7
270
180
217
10
9.1
3.9
8.1
2.6
3.1
4