90 3M, 90 Datasheet - Page 3
![ADHESIVE, 24FL.OZ](/photos/24/33/243389/4425876_sml.jpg)
90
Manufacturer Part Number
90
Description
ADHESIVE, 24FL.OZ
Manufacturer
3M
Datasheet
1.90.pdf
(4 pages)
Specifications of 90
Adhesive Type
Elastomer
Adhesive Applications
Bonding - General Purpose
Color
Clear
Dispensing Method
Aerosol
Weight
141.6lb
Volume
24fl.oz. (US)
3M
Spray Adhesive
Typical Adhesive
Performance
Characteristics
(continued)
Application/Handling
Information
Storage and Shelf Life
™
Hi-Strength 90
Note: The following technical information and data should be considered representative
Overlap Shear Strength at Temperature: Overlap shear strength on birch
plywood to itself tested at two inches per minute separation rate.
Storage: Store product at 60-80°F (16-27°C) for maximum storage life. Higher
temperatures can reduce normal storage life. Lower temperatures can cause
increased viscosity of a temporary nature. Rotate stock on a “first in-first out” basis.
Shelf Life: When stored at the recommended conditions in the original, unopened
container, this product has a shelf life of 15 months from date of shipment.
Directions for Use
1. Surface Preparation: Surfaces must be clean, dry and free from dirt, dust, oil,
2. Application Temperature: For best results, the temperature of the adhesive and
3. Application:
4. Bonding Range:
5. Cleanup: Excess adhesive may be removed with 3M™ Adhesive Remover Citrus
*Note: When using solvents, extinguish all ignition sources and follow the
loose paint, wax or grease, etc.
the surfaces being bonded should be at least 65°F (18°C).
• Select spray pattern width by turning spray tip to desired setting.
• Hold can 6-8 inches from surface to be sprayed.
• Spray both surfaces to be bonded.
• Make bond while adhesive is still tacky.
• Clean spray tip with turpentine. *
• 1 surface - Not Recommended
• 2 surface - 1 to 15 minutes
• Extra Strong Bonds - Double coat both surfaces in a criss cross pattern, allow
Base. *
2-5 minutes drying time.
or typical only and should not be used for specification purposes.
manufacturer’s precautions and directions for use.
Test Temperature
120°F (49°C)
140°F (60°C)
160°F (71°C)
180°F (82°C)
-30°F (-34°C)
75°F (24°C)
- 3 -
Value - PSI (lbs. / square inch)
973
270
172
124
105
41