1658651-1 Tyco Electronics, 1658651-1 Datasheet - Page 5

• Manufacturer Part Number: 1658651-1
• Description: D SUB SHELL, RECEPTACLE, SIZE 4, STEEL
• Manufacturer: Tyco Electronics
• Series: AMPLIMITE HDP-20r
• Type: DB37r

Specifications of 1658651-1

• Connector Shell Size: 4
• Connector Body Material: Metal
• Body Material: Steel
• Gender: Receptacle
• Connector Type: D Sub
• Number Of Positions: 37
• Number Of Rows: 2
• Flange Feature: Hollow, Unthreaded
• Features: Shielded
• Note: Contacts Not Provided
• For Use With: HDP-20 Series D Sub Connectors
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: A31489

3.3. Contact Insertion
Terminated contacts are inserted into the back of the connector housing, and snap in place. The cavity rows
are numbered for your convenience. If your design does not require the use of all cavities, the contacts should
be distributed evenly throughout the connector.
3.4. Terminated Strip Length
Terminated strip length shall be as indicated in Figure 3.
3.5. Ferrule Crimp Requirements
Slide the ferrule onto the cable prior to stripping the cable. Keep the larger diameter end of the ferrule toward
the end to be terminated. If the ferrule has only one diameter, no orientation is required. After the wires and
contacts have been terminated slide the ferrule until it is over the braid. Crimp the braid according to the
instructions packaged with the appropriate tooling. See Figure 4 for ferrule crimp requirements.
CONTACT POSN “F” LENGTH
CONTACT POSN “B” LENGTH
Rev D
TERMINATED ASSY LENGTH
TERMINATED STRIP LENGTH
NOTE
NOTE
i
i
15
25
37
50
15
25
37
50
9
9
After inserting a contact into the housing, pull back lightly on the wire to make sure the contact is fully seated.
Trim excess braid flush with front of ferrule with a knife.
33.02 [1.300]
39.12 [1.540]
38.99 [1.535]
48.06 [1.892]
47.65 [1.876]
38.1 [1.500]
F + 0.64 [.025]
Connector
Section D- - D
1.02 [.040] Max
0.38 [.015] Max
Figure 4 (cont’d)
Figure 3
C
B + 1.27 [.050]
Strip Length
Terminated
D
D
E
E
Section E- - E
Braid
Ferrule
B Max
A
114- 40030
5 of 13