1645499-5 Tyco Electronics, 1645499-5 Datasheet - Page 42

• Manufacturer Part Number: 1645499-5
• Description: HARD METRIC CONNECTOR, PLUG, 7POS
• Manufacturer: Tyco Electronics

Specifications of 1645499-5

• No. Of Contacts: 7
• Gender: Header
• Contact Termination: Press Fit
• No. Of Rows: 1
• Contact Plating: Gold
• Contact Material: Phosphor Bronze
• Current Rating: 10A
• Connector Type: Hard Metric (HM)

MULTIGIG RT Power Modules
The newest of the power modules.
Designed specifically for use with
Tyco Electronics 2 mm Backplane
Connectors. Suitable for 0.8 mm
Card Spacing and made from
high conductivity copper alloys,
these power modules offer
improved power density and high
cycle life. The distribution to the
PCB is through six ACTION PIN
compliant tails which offer maxi-
mum surface area contact to the
plated through hole. The design
offers electrical protection with its
sacrificial contact design and
mechanical protection by recess-
ing the power contacts. Contacts
are rated for up to 20 Amps per
contact, which delivers up to
120 Amps per linear inch. Three
contact mating lengths are avail-
able, in 1.5 mm sequence levels.
Universal Power Module (UPM)
Also designed to complement
Tyco Electronics 2 mm Backplane
Connectors, the design meets
IEC 60950 touch-safe require-
ments by reversing the orientation
as compared to the Futurebus+
Power Modules. The touch-safe
receptacle is applied to the “hot”
side, which is typically the back-
plane side of the connection.
Offered in both a Standard Power
grade, rated at 10 Amps per con-
tact and High Power grade which
carries 16 Amps per contact —
resulting in up to 100 Amps per
linear inch. Hot-plug design and
low normal force provide high
durability and high reliability.
Three contact mating lengths are
available in 1.6 mm sequence
levels. Multiple contact sequence
patterns are available.
Z-PACK 2 mm Futurebus+
Power Modules
The power modules, designed to
IEC 61076-4-OX, are used along
with Tyco Electronics Futurebus+
Backplane Connectors. The con-
tacts are rated for 3 Amps and
fully loaded will carry approx.
50 Amps per linear inch. Three
contact mating lengths available
in 0.75 mm increments.
Catalog 1773096
Revised 2-10
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Power Connectors & Interconnection Systems
Mini Power Modules for PCB-to-PCB Power Distribution
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
• Lubricated for Environmental Protection
• Designed for Hot-Plug
• 4 PCB Tails per Contact
• Designed for Hot-Plug Operation
• 6 PCB tails per contact
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-1106-0803
South America: 55-11-2103-6000
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-(0)8002-67666
51