ERJM1WSF10MU Panasonic, ERJM1WSF10MU Datasheet - Page 11
![RESISTOR, 2512, 0R01, 1%, 2W](/photos/26/15/261517/1577576-40_sml.jpg)
ERJM1WSF10MU
Manufacturer Part Number
ERJM1WSF10MU
Description
RESISTOR, 2512, 0R01, 1%, 2W
Manufacturer
Panasonic
Series
ERJM1Wr
Specifications of ERJM1WSF10MU
Resistance
0.01ohm
Resistance Tolerance
± 1%
Power Rating
2W
Resistor Element Material
Bare Metal
Resistor Case Style
2512
No. Of Pins
2
Svhc
No
Temperature Coefficient
± 75ppm/°C
Material, Element
Thick Film
Package Type
2512
Power, Rating
1 W
Temperature, Operating, Maximum
170 °C
Temperature, Operating, Minimum
–55 °C
Termination
SMT
Tolerance
±1 %
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
ERJM1WSF10MU
Manufacturer:
PANASONI
Quantity:
21 000
Company:
Part Number:
ERJM1WSF10MU
Manufacturer:
PAN
Quantity:
6 000
Subject
Part No.
3. Specifications
3-1 Specifications of Taping
3-2 Quantity in Reel : 3000 pcs./reel
3-3 Taping Condition
4. Outer Packaging
5. Marking
• When the test shall be operated with the below conditions, the peel strength shall
• Minimum Bending Radius
• Resistance to climate
• Chip resistors shall not be sticking to top tape and bottom tape.
• Chip resistors shall be easy to take out from carrier tape.
• Compartment and sprocket hole shall not have flash and break.
• When reels shall not reach Max. quantity, the remaining empty space shall be
• When the quantity shall be few, alternative packaging methods may be used. No
• Side of Reel(Marking shall be on one side.)
• Packaging Box
be 0.098N to 0.686N and the tape shall not have flash and tear after peeling.
When the carrier tape shall be bent to Minimum Bending Radius (15mm), there
shall be no defection of chip and no break of the carrier tape.
shall be done for 1 time.
When resistors shall be exposed at 60deg.C, 90 to 95 %RH for 120 hours, there
shall be no defection of chip and no break of carrier tape. When the top tape
shall be peeled, it shall not have flash and tear.
buried with buffer material.
problem must occur during the exportation of the product.
1) Part Name('Fixed metal plate flat chip resistor' following part name on invoice)
2) Part Number
6) Manufacturing Country
1) Part Number
Low Resistance Value Chip Resistor
<Test Method>
Carrier Tape
PANASONIC ELECTRONIC DEVICES CO.,LTD.
ERJM1W
3) Quantity
2) Quantity 3) Maker Name
10°
4) Lot Number 5) Maker Name
Marking
Tape
Top Tape
Peeling Direction
However the test
Spec. No.
151-RJM-E2W00A
10 -
11