GLK24064-16-1U-WB Matrix Orbital, GLK24064-16-1U-WB Datasheet - Page 11

• Manufacturer Part Number: GLK24064-16-1U-WB
• Description: LCD Graphic Display Modules & Accessories Blue Background White Text
• Manufacturer: Matrix Orbital

Specifications of GLK24064-16-1U-WB

• Module Size (w X H X T): 180 mm x 65 mm x 17.95 mm
• Viewing Area (w X H): 132.2 mm x 39.2 mm
• Backlighting: LED
• Background Color: Blue
• Operating Temperature Range: - 20 C to + 70 C
• Attached Touch Screen: No
• Product: Graphic LCD Module
• Style: LCD Graphic Display
• Interface: RS-232, I2C
• Display Mode: White Text

2.1.1 Power Through DB-9 Jumper
Power through DB-9 Jumper pictured in
the power through DB-9 option, see table ?? on page ?? for display module voltage requirements.
2.2 Power/Data Connector
requires five volts for the standard display module, between nine to fifteen for the wide voltage (V) and be-
tween nine to thirty-five volts for the wide voltage with efficient power supply module (VPT). The voltage is
applied through pins one and four of the four pin Power/Data connector. Pins two and three are reserved for
serial transmission, using either the RS-232/TTL or the I
by the Protocol Select Jumpers. Pins two and three may be reversed by changing the Legacy Connector
Jumpers in order to be compatible with previous PCB revisions.
Matrix Orbital
In order to provide power through pin 9 of the DB-9 Connector you must place a solder jumper on the
The Power/Data Connector provides a standard connector for powering the display module. The GLC24064
WARNING Do not apply voltage through pin 9 of the DB-9 connector
AND through the Power/Data Connector at the same time.
Figure 12: Power Through DB-9 Jumper
Figure 11: RS-232 Pin out
figure 12
GLC24064
below. The GLC24064 allows all voltage models to use
2
C protocol, depending on what has been selected
Pin
Pin
Pin
Pin
9
2
3
5
Rx \ SCL (I
Tx \ SDA (I
GND
PWR
9 Jumper. See table ?? on page ?? for
power requirements.)
(Must solder Power Through DB-
2
2
C clock)
C data)
6