GLK24064-16-1U-WB Matrix Orbital, GLK24064-16-1U-WB Datasheet - Page 12

• Manufacturer Part Number: GLK24064-16-1U-WB
• Description: LCD Graphic Display Modules & Accessories Blue Background White Text
• Manufacturer: Matrix Orbital

Specifications of GLK24064-16-1U-WB

• Module Size (w X H X T): 180 mm x 65 mm x 17.95 mm
• Viewing Area (w X H): 132.2 mm x 39.2 mm
• Backlighting: LED
• Background Color: Blue
• Operating Temperature Range: - 20 C to + 70 C
• Attached Touch Screen: No
• Product: Graphic LCD Module
• Style: LCD Graphic Display
• Interface: RS-232, I2C
• Display Mode: White Text

2.2.1 Legacy Data Connector Jumpers
Legacy Data Connector Jumpers, labeled with the
X
of receiving on pin two and transmitting on pin three of the Power/Data Connector.
2.3 Protocol Select Jumpers
display module between RS-232, TTL and I
with zero ohm resistors on the 232 jumpers. In order to place the display module in I
first remove the zero ohm resistors from the 232 jumpers and then solder the resistors on to the I2C jumpers.
Matrix Orbital
symbol. This will allow you to transmit on pin two, and receive data on pin three instead of the default
To reverse pins two and three of the Power/Data Connector remove the zero ohm resistors from the
The Protocol Select Jumpers, pictured below in
WARNINGS
• Do not apply any power with reversed polarization.
• Do not apply any voltage other than the specified voltage.
Figure 14: Legacy Data Connector Jumpers
Figure 13: Power Connector and Pin out
2
C protocols. As a default, the jumpers are set to RS-232 mode
GLC24064
=
symbol and place them on the jumpers labeled with the
figure 15
, provide the means necessary to toggle the
Pin
Pin
Pin
Pin
1
2
3
4
PWR
Rx \ SCL (I
Tx \ SDA (I
GND
x
=
[
[
(See table ?? on page ??)
Pin 2
Pin 3
Pin 2
Pin 3
2
2
2
C clock)
C mode you must
C data)
Power/Data Connector
Rx \ SCL (I
Tx \ SDA (I
Rx \ SCL (I
Tx \ SDA (I
7
2
2
2
2
C clock)
C clock)
C data)
C data)