HSDL-3021-021 Avago Technologies US Inc., HSDL-3021-021 Datasheet - Page 22
![Infrared Transceivers FIR + RC](/photos/26/70/267004/hsdl-3021_wht_sml.jpg)
HSDL-3021-021
Manufacturer Part Number
HSDL-3021-021
Description
Infrared Transceivers FIR + RC
Manufacturer
Avago Technologies US Inc.
Datasheet
1.HSDL-3021-021.pdf
(26 pages)
Specifications of HSDL-3021-021
Wavelength
885 nm
Continual Data Transmission
4 Mbit/s
Transmission Distance
50 cm
Radiant Intensity
4 mW/sr
Half Intensity Angle Degrees
30 deg
Pulse Width
4 us, 1.6 us
Maximum Rise Time
40 ns, 600 ns
Maximum Fall Time
40 ns, 600 ns
Led Supply Voltage
0 V to 6.5 V
Operating Voltage
2.4 V to 3.6 V
Maximum Operating Temperature
+ 85 C
Minimum Operating Temperature
- 25 C
Dimensions
8 mm x 3 mm x 2.5 mm
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
HSDL-3021-021
Manufacturer:
Agilent
Quantity:
1
Part Number:
HSDL-3021-021
Manufacturer:
AVAGO/安华高
Quantity:
20 000
Company:
Part Number:
HSDL-3021-021/HSDL3021
Manufacturer:
Agilent
Quantity:
10 000
Shape of the Window
From an optics standpoint, the
window should be flat. This
ensures that the window will not
alter either the radiation pattern
of the LED, or the receive pattern
of the photodiode. If the window
must be curved for mechanical or
industrial design reasons, place
the same curve on the backside of
the window that has an identical
radius as the front side. While this
Flat Window
(First Choice)
22
will not completely eliminate the
lens effect of the front curved
surface, it will significantly reduce
the effects. The amount of change
in the radiation pattern is
dependent upon the material
chosen for the window, the radius
of the front and back curves, and
the distance from the back surface
to the transceiver. Once these
items are known, a lens design
can be made which will eliminate
Curved Front and Back
(Second Choice)
Curved Front, Flat Back
(Do not use)
the effect of the front surface
curve. The following drawings
show the effects of a curved
window on the radiation pattern.
In all cases, the center thickness
of the window is 1.5 mm, the
window is made of polycarbonate
plastic, and the distance from the
transceiver to the back surface of
the window is 3 mm.