HSDL-3209-021 Lite-On Electronics, HSDL-3209-021 Datasheet - Page 11

• Manufacturer Part Number: HSDL-3209-021
• Description: Infrared Transceivers IR Transceiver 115Kb/s
• Manufacturer: Lite-On Electronics

Specifications of HSDL-3209-021

• Wavelength: 875 nm, 880 nm
• Continual Data Transmission: 115.2 Kbit/s
• Radiant Intensity: 14 mW/sr
• Half Intensity Angle Degrees: 30 deg to 60 deg
• Pulse Width: 4 ms, 1.6 ms
• Maximum Rise Time: 60 ns, 600 ns
• Maximum Fall Time: 60 ns, 600 ns
• Led Supply Voltage: 0 V to 6.5 V
• Maximum Forward Current: 50 mA
• Operating Voltage: 2.4 V to 3.6 V
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: - 25 C
• Dimensions: 7 mm x 2.8 mm x 1.6 mm
• Data Rate: 115.2kbs (SIR)
• Idle Current, Typ @ 25° C: 100µA
• Link Range, Low Power: 30cm
• Operating Temperature: -25°C ~ 70°C
• Orientation: Side View
• Shutdown: *
• Size: 7mm x 2.8mm x 1.6mm
• Standards: IrPHY 1.4
• Supply Voltage: 2.4 V ~ 3.6 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

1.2 Recommended Metal Solder Stencil Aperture
It is recommended that only a 0.152 mm (0.006 inches) or
a 0.127 mm (0.005 inches) thick stencil be used for solder
paste printing. This is to ensure adequate printed solder
paste volume and no shorting. See the table below the
drawing for combinations of metal stencil aperture and
metal stencil thickness that should be used.
Aperture opening for shield pad is 2.7 mm x 1.25 mm as
per land pattern.
1.3 Adjacent Land Keepout and Solder Mask Areas
Adjacent land keep-out is the maximum space occupied
by the unit relative to the land pattern. There should be
no other SMD components within this area. The minimum
solder resist strip width required to avoid solder bridging
adjacent pads is 0.2 mm. It is recommended that two
fiducial crosses be place at midlength of the pads for unit
alignment.
Note: Wet/Liquid Photo- Imageable solder resist/mask is
recommended.
11
l
Apertures as
per land
Dimensions
w
Stencil Thickness, t (mm)
0.152 mm
0.127 mm
0.2
Solder mask
t
Length, l (mm)
2.60 ± 0.05
3.00 ± 0.05
7.2
Aperture size (mm)
Units: mm
Width, w (mm)
0.55 ± 0.05
0.55 ± 0.05
2.6
3.0