201092-1 TE Connectivity, 201092-1 Datasheet - Page 63

• Manufacturer Part Number: 201092-1
• Manufacturer: TE Connectivity
• Type: Screwr

Specifications of 201092-1

• Product Length (mm): 20.62mm
• Product Depth (mm): 4.67mm
• Lead Free Status / RoHS Status: Not Compliant

Dimensions are shown for reference
purposes only.
M Series
Pin and Socket Connectors
M Series V.35 Special Application Connectors
Material Specifications
Contacts
The material composition
and construction of AMP
Type III+ contacts encom-
passes varying price
ranges and performance
characteristics. Specific
materials and available plat-
ing thicknesses of each
contact are provided.
Housings
M Series V.35 connector
housings are made of
general purpose phenolic
(black) or polyester (black).
Phenolic housings are
molded of material per
MIL-M-14, Type CFG. The
performance characteristics
of this material makes the
connector an excellent
choice in applications where
exceptional resistance to
acids, alkalies, or solvents
is not a prime factor.
Hardware
A variety of materials such
as plated steel, stainless
steel, zinc (nickel plated)
and aluminum are used in
the manufacture of M Series
V.35 connector hardware.
This provides for the proper
operation and durability of
each hardware component,
while offering a choice of
economies to satisfy partic-
ular application requirements.
Dimensions are in inches and mil-
limeters unless otherwise specified.
Values in brackets are metric equiva-
lents.
Current Carrying Capabilities
The total current capacity
of each contact in any given
M Series connector is
dependent upon the heat
rise resulting from the com-
bination of electrical loads
of all contacts in the con-
nector arrangement and the
maximum ambient tempera-
ture in which the connector
will be operating. Caution
must be taken to insure that
this combination of conditions
does not cause the internal
temperature of the connector
to exceed the maximum
operating temperature
of the housing material.
Several variables which
must be considered when
determining this maximum
current capability for your
application are:
a) Wire Size - Larger wire
b) Connector Size - In
c) Current Load Distribution -
d) Ambient Temperature -
Specifications subject to change.
Spreading those lines
with greater current loads
throughout the connec-
tor, particularly around
the outer perimeter, will
enhance heat dissipation.
will carry more current
since it has less internal
resistance to current flow
and generates less heat.
The wire also conducts
heat away from the
connector.
general, with more
circuits in a connector,
less current per contact
can be carried.
With higher ambient
temperature, less
current can be carried.
(Continued)
Performance Data
Temperature Rating—Phenolic
Housings, -55°C to +150°C
Polyester Housings— –55°C to
+130°C
Flammability Rating—Phenolic
Material, UL 94V-0
Dielectric Withstanding
Voltage (at sea level)
Type III+ Contacts, 900 VAC,
RMS
Durability (Mating/Unmating)—
Contacts, Gold plated—
500 cycles; Contacts, Bright
tin-lead plated— 50 cycles
Note: For detailed information on the
above performance data and further
information on other performance data
such as Insulation Resistance, Thermal
Shock, Moisture Resistance, Vibration
and Physical Shock, request AMP
Product Specification No. 108-10001.
Technical Support Center
1-800-522-6752
www.tycoelectronics.com
Catalog 82003
Revised 3-01
63