1761987-7 TE Connectivity, 1761987-7 Datasheet - Page 3

• Manufacturer Part Number: 1761987-7
• Description: MINI SAS CONNECTOR, RECEPTACLE 26POS SMD
• Manufacturer: TE Connectivity
• Series: Everclearr

Specifications of 1761987-7

• Number Of Terminals: 26
• Termination Method: Solder
• Body Orientation: Right Angle
• Gender: RCP
• Number Of Ports: 1Port
• Pitch (mm): 0.8mm
• Number Of Contacts: 26POS
• Contact Plating: Gold Over Nickel
• Housing Material: Liquid Cryst Polymer
• Contact Material: Phosphor Bronze
• Mounting Style: Surface Mount
• Product Height (mm): 5.35mm
• Product Length (mm): 13.4mm
• Connector Type: Mini SAS
• No. Of Contacts: 26
• Contact Termination: Surface Mount Horizontal
• Connector Mounting: PCB
• Rohs Compliant: Yes
• Product Type: Connector
• Pcb Mounting Orientation: Right Angle
• Receptacle Configuration: Mini-SAS
• Pcb Mount Style: Surface Mount
• Pcb Mount Retention: Without
• Keyed: No
• Proprietary Name: EVERCLEAR
• Stackable: No
• Number Of Positions: 26
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold (30)
• Shell: Without
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Reflow solder capable to 245°C, Reflow solder capable to 260°C
• Rohs/elv Compliance History: Always was RoHS compliant
• High Temperature Housing: Yes
• Packaging Method: Tape & Reel
• Lead Free Status / RoHS Status: Compliant

Durability.
Plug insertion force.
Plug extraction force.
Latch retention, axial.
Latch retention, side load.
Latch retention, toward the latch.
Latch retention, away from the
latch.
Therm al shock.
Hum idity/tem perature cycling.
Tem perature life.
Rev D
Test Description
100 N [22 lbf] m inim um .
45 N [10 lbf] m inim um for vertical
45 N [10 lbf] m inim um for vertical
See Note.
55.5 N [12.5 lbf] m axim um .
49 N [11 lbf] m axim um .
68 N [15 lbf] m inim um
perpendicular pull for external
products.
44.5 N [10 lbf] m inim um
perpendicular pull for internal
products.
and right angle shells.
66.7 N [15 lbf] m inim um for right
angle die cast shells.
and right angle shells.
66.7 N [15 lbf] m inim um for right
angle die cast shells.
45 N [10 lbf] m inim um for vertical
and right angle shells.
66.7 N [15 lbf] m inim um for right
angle die cast shells.
See Note.
See Note.
See Note.
Figure 1 (continued)
ENVIRONMENTAL
Requirem ent
EIA-364-9.
Mate and unm ate specim ens for
250 cycles at a m axim um rate of
500 cycles per hour with latches
engaged.
EIA-364-13.
Measure force necessary to m ate
specim ens with latches engaged at
a m axim um rate of 6.35 m m [.25 in]
per m inute.
EIA-364-13.
Measure force necessary to unm ate
specim ens with latches disengaged
at a m axim um rate of 6.35 m m [.25
in] per m inute.
Apply axial load to engaged cable
plug connector and hold for 1
m inute.
Apply load perpendicular to axis and
hold for 1 m inute.
Apply load perpendicular to axis to
specim ens m ounted on the top of
the printed circuit board and hold for
1 m inute.
Apply load perpendicular to axis to
specim ens m ounted on the bottom
of the printed circuit board and hold
for 1 m inute.
EIA-364-32, Test Condition VII.
Subject m ated specim ens to 10
cycles between -55 and 105°C.
EIA-364-31, Method III.
Subject m ated specim ens to 10
cycles (10 days) between 25 and
65°C at 80 to 100% RH.
EIA-364-17, Method A, Test
Condition 4.
Subject m ated specim ens to 105°C
for 120 hours.
Procedure
108-2234
3 of 6