1761987-7 TE Connectivity, 1761987-7 Datasheet - Page 6

• Manufacturer Part Number: 1761987-7
• Description: MINI SAS CONNECTOR, RECEPTACLE 26POS SMD
• Manufacturer: TE Connectivity
• Series: Everclearr

Specifications of 1761987-7

• Number Of Terminals: 26
• Termination Method: Solder
• Body Orientation: Right Angle
• Gender: RCP
• Number Of Ports: 1Port
• Pitch (mm): 0.8mm
• Number Of Contacts: 26POS
• Contact Plating: Gold Over Nickel
• Housing Material: Liquid Cryst Polymer
• Contact Material: Phosphor Bronze
• Mounting Style: Surface Mount
• Product Height (mm): 5.35mm
• Product Length (mm): 13.4mm
• Connector Type: Mini SAS
• No. Of Contacts: 26
• Contact Termination: Surface Mount Horizontal
• Connector Mounting: PCB
• Rohs Compliant: Yes
• Product Type: Connector
• Pcb Mounting Orientation: Right Angle
• Receptacle Configuration: Mini-SAS
• Pcb Mount Style: Surface Mount
• Pcb Mount Retention: Without
• Keyed: No
• Proprietary Name: EVERCLEAR
• Stackable: No
• Number Of Positions: 26
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold (30)
• Shell: Without
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Reflow solder capable to 245°C, Reflow solder capable to 260°C
• Rohs/elv Compliance History: Always was RoHS compliant
• High Temperature Housing: Yes
• Packaging Method: Tape & Reel
• Lead Free Status / RoHS Status: Compliant

4.
4.1.
4.2.
4.3.
4.4.
Rev D
QUALITY ASSURANCE PROVISIONS
Qualification Testing
A.
B.
Requalification Testing
If changes significantly affecting form , fit or function are m ade to the product or m anufacturing process,
product assurance shall coordinate requalification testing, consisting of all or part of the original testing
sequence as determ ined by developm ent/product, quality and reliability engineering.
Acceptance
Acceptance is based on verification that the product m eets the requirem ents of Figure 1. Failures
attributed to equipm ent, test setup or operator deficiencies shall not disqualify the product. If product
failure occurs, corrective action shall be taken and specim ens resubm itted for qualification. Testing to
confirm corrective action is required before resubm ittal.
Quality Conform ance Inspection
The applicable quality inspection plan shall specify the sam pling acceptable quality level to be used.
Dim ensional and functional requirem ents shall be in accordance with the applicable product drawing
and this specification.
Specim en Selection
Specim ens shall be prepared in accordance with applicable Instruction Sheets and shall be
selected at random from current production. Test groups 1 and 2 shall consist of 7 specim ens
each. Test group 3 shall consist of 14 specim ens. Test groups 4, 5 and 6 shall consist of 5
specim ens each.
Test Sequence
Qualification inspection shall be verified by testing specim ens as specified in Figure 2.
108-2234
6 of 6